I was given this old Dimension 4700 so I have been reading about its problems and that led me here.
Found one cap with a bulged top C2J2 = 1000 x 10v @ 10mm x 14mm Nichicon (HN) top left of 24-pin PS socket.
C7E1 = 1000 x 10v @ 10mm x 14mm same Nichicon cap as above between PCIe socket and PCI socket.
C6J1 = 2200 x 6.3 @ 10mm x 14mm United Chemi-Con (KZJ) lower left of hard drive socket.
The picture is poor so I marked the caps in question with a red marker.
What would be the best (available) replacement cap and where can I order them?
Thanks
Ron.
Found one cap with a bulged top C2J2 = 1000 x 10v @ 10mm x 14mm Nichicon (HN) top left of 24-pin PS socket.
C7E1 = 1000 x 10v @ 10mm x 14mm same Nichicon cap as above between PCIe socket and PCI socket.
C6J1 = 2200 x 6.3 @ 10mm x 14mm United Chemi-Con (KZJ) lower left of hard drive socket.
The picture is poor so I marked the caps in question with a red marker.
What would be the best (available) replacement cap and where can I order them?
Thanks
Ron.
Comment