Hello there,
I have a TCL Tv that the initial problem was that it would play fine for 10 to 15 seconds and it would cut off. So I replaced the main board and tv played great but when I was closing the tv I noticed a distorted picture. I wiggle the LVDS cable that connects main board to interface board (not sure if I would call it T-Con) and picture looked good. I taped the LVDS cable thinking it was loose but nothing, problem still come and goes when I wiggle cable.
I decided to reversed the cable (it works with samsung tvs) and tv now shows like if its stuck in a test pattern. It shows green, blue, red color (see pictures).
I couldn't understand why so I put it back to like it was originally and now it doesnt show anything at all, just the backlight appears to be on and sound.
Any suggestions? I added a few pictures.
Thanks for your time.
I have a TCL Tv that the initial problem was that it would play fine for 10 to 15 seconds and it would cut off. So I replaced the main board and tv played great but when I was closing the tv I noticed a distorted picture. I wiggle the LVDS cable that connects main board to interface board (not sure if I would call it T-Con) and picture looked good. I taped the LVDS cable thinking it was loose but nothing, problem still come and goes when I wiggle cable.
I decided to reversed the cable (it works with samsung tvs) and tv now shows like if its stuck in a test pattern. It shows green, blue, red color (see pictures).
I couldn't understand why so I put it back to like it was originally and now it doesnt show anything at all, just the backlight appears to be on and sound.
Any suggestions? I added a few pictures.
Thanks for your time.
Comment