Badcaps.net Forum
Go Back   Badcaps Forums > Welcome to the Badcaps.net Tech Forum! > Announcements & Related News
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools
Old 01-13-2021, 01:41 AM   #25141
zerobit110
New Member
 
Join Date: Jan 2021
City & State: Athens
My Country: Greece
I'm a: Knowledge Seeker
Posts: 1
Thumbs up Re: New Members - please post your introductions here

Greetings from Greece!
First of all I wish a Happy New Year to everyone!
Thanks for the acceptance to this useful forum!
My name is Frank and I own a computer repair shop.
Keep up the good work!
zerobit110 is offline   Reply With Quote
Old 01-13-2021, 02:09 AM   #25142
mcr42
New Member
 
Join Date: Jan 2021
City & State: Magdeburg
My Country: Germany
Line Voltage: 230VAC 50Hz
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hi all,

I'm an electronics engineer from Germany.
Finally stumbled across this forum looking for input on an ancient dc7700, which has trouble recognizing SATA disks. (Video output is also very jittery once the processor starts. Caps are visibly under pressure, so no doubt about the cause...)

Strange I found this board only today, as I regularly repair died-out caps in all kinds of stuff. But it's good to see a special place for this particular problem.
Best wishes to everyone for the new year.
mcr42 is offline   Reply With Quote
Old 01-13-2021, 03:01 AM   #25143
tomy78
New Member
 
Join Date: Jul 2019
City & State: Solo
My Country: Indonesia
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

hello i'm new member here. From Indonesia. I hope have new knowledge in here. thanks
tomy78 is offline   Reply With Quote
Old 01-13-2021, 04:39 AM   #25144
Zaw Maung
New Member
 
Join Date: Jan 2021
City & State: Pathein
My Country: Myanmar
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hello, My name is Zaw Maung i'm from Myanmar. I like fixing things, Thank
Zaw Maung is offline   Reply With Quote
Old 01-13-2021, 05:54 AM   #25145
rakiem
New Member
 
Join Date: Jan 2021
City & State: Barcelona, Catalonia
My Country: Spain
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Hi all! I am glad to be in this forum because finally I expect to be able to fix the bios of my old Laptop acer aspire 5752g :-)
rakiem is offline   Reply With Quote
Old 01-13-2021, 05:55 AM   #25146
rakiem
New Member
 
Join Date: Jan 2021
City & State: Barcelona, Catalonia
My Country: Spain
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

sorry, it's 5742g
rakiem is offline   Reply With Quote
Old 01-13-2021, 09:16 AM   #25147
FunkieVibes
New Member
 
Join Date: Jan 2021
City & State: Gonzales
My Country: United States
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Hello, I'm a new member. I like fixing electronics for fun and I was here to reply to a post someone had with issues with their TV.
FunkieVibes is offline   Reply With Quote
Old 01-13-2021, 09:26 AM   #25148
Lisanimaux
New Member
 
Join Date: Jan 2021
City & State: Montreal
My Country: Canada
I'm a: Knowledge Seeker
Posts: 12
Default Re: New Members - please post your introductions here

Hi! I just created my account and hope I can find answers to fix my TV here. Stay safe!
Lisanimaux is offline   Reply With Quote
Old 01-13-2021, 11:21 AM   #25149
linkoln01
New Member
 
Join Date: Mar 2013
City & State: almaty
My Country: kazahstan
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Greetings to the forum participants. Glad to be on the same team with you. :вращение:
linkoln01 is offline   Reply With Quote
Old 01-13-2021, 12:48 PM   #25150
bokepatza
New Member
 
Join Date: Jul 2013
City & State: Santa Cruz de Tenerife
My Country: Spain
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hi all,

I registered several years ago, but didn't come to post yet, just reading. I would like to recognize the great job shared on this community.

Thanks all.
bokepatza is offline   Reply With Quote
Old 01-13-2021, 02:34 PM   #25151
pacoelcico
New Member
 
Join Date: Jan 2021
City & State: MADRID
My Country: España
I'm a: Knowledge Seeker
Posts: 2
Default Re: New Members - please post your introductions here

Hola a todos.
Mi nombre es Paco un saludo a todos desde España soy tecnico electronico Muchas gracias por admitirme en el foro.
pacoelcico is offline   Reply With Quote
Old 01-13-2021, 04:54 PM   #25152
Jgueydan
New Member
 
Join Date: Jan 2021
City & State: Kennesaw, GA
My Country: United States
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hi all! Found this forum while searching for tv schematics and have visited a couple of times and it seemed like I was missing out on a lot of great info while not registering...so here I am! Been working in electronics as a tech for almost 30 years, so will be more than willing to help whenever the opportunity presents itself. But I'm always learning too, so sometimes best to keep my mouth shut and listen more often than not!
Jgueydan is offline   Reply With Quote
Old 01-13-2021, 06:57 PM   #25153
Eric D
New Member
 
Join Date: Jan 2021
City & State: North Bay, Ontario
My Country: Canada
Line Voltage: 500,000-volt transmission lines :)
I'm a: Knowledge Seeker
Posts: 6
Default Re: New Members - please post your introductions here

Hello Folks
Eric D is offline   Reply With Quote
Old 01-13-2021, 10:01 PM   #25154
struggleIT
New Member
 
Join Date: Jan 2021
City & State: Chesapeake, VA
My Country: United States
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hello, world! Just trying to expand my knowledge and learn more about board repair. Thanks!
struggleIT is offline   Reply With Quote
Old 01-13-2021, 10:56 PM   #25155
hotsho111
New Member
 
Join Date: Jan 2021
City & State: N/A
My Country: United States
I'm a: Knowledge Seeker
Posts: 7
Default Re: New Members - please post your introductions here

Hey! just popping in so I can get some help from the experts around here
hotsho111 is offline   Reply With Quote
Old 01-14-2021, 09:45 AM   #25156
fabio fanesi
New Member
 
Join Date: Jul 2020
City & State: Osimo
My Country: Italy
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hi everyone! I am an absolute beghinner to electronics and computers, I'm Fabio, from Italy.
Can't wait to start learning about notebook repair, my dream is to have one day a job as a repair technician
fabio fanesi is offline   Reply With Quote
Old 01-14-2021, 10:22 AM   #25157
P.Barrt
New Member
 
Join Date: Jan 2021
City & State: Errenteria-Guipúzkoa
My Country: España
I'm a: Knowledge Seeker
Posts: 2
Thumbs up Re: New Members - please post your introductions here

Hola a todos.
Me presento a este foro.
Me encanta la electrónica aunque en honor a la verdad no soy técnico titulado, aunque tengo eso sí conocimientos básicos estoy aquí sobre todo para intentar aprender, he trabajado en otros oficios pero he estado siempre cercano a la reparación, montaje y desmontaje de portátiles de todas las marcas habidas y ordenadores de todo tipo.
Al final sin querer o queriendo conozco bien casi todos y cada uno de los componentes, es decir en la práctica, que no en la teórica.
En fin, que espero con vuestra ayuda ir adquiriendo y aumentando por aquí todo conocimiento posible.
Un saludo a todos los foreros de este sitio.
P.Barrt is offline   Reply With Quote
Old 01-14-2021, 11:04 AM   #25158
ESDTech
New Member
 
Join Date: Jan 2021
City & State: Evans City, PA
My Country: United States
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 1
Default Re: New Members - please post your introductions here

Hey, to one and all. Glad to find a place where learning is the emphasis. My online is ESDTech and I have been in electronic mfg and troubleshooting/repair for 27 years. Some of that time was in NDT equipment repair. Mostly I did the rotating NDT repair and rebuild. Now I fix what ever is around the house that is broken including our Acer A515-51 laptop. That is how I got to BADCAPS.
ESDTech is offline   Reply With Quote
Old 01-14-2021, 01:03 PM   #25159
Halls
New Member
 
Join Date: Jan 2021
City & State: Budapest
My Country: Hungary
I'm a: Knowledge Seeker
Posts: 5
Default Re: New Members - please post your introductions here

Hello i'm new member here, from Hungary.
I hope have new knowledge in here.
Thanks
Halls is offline   Reply With Quote
Old 01-14-2021, 01:39 PM   #25160
iasif
New Member
 
Join Date: Jan 2021
City & State: Jersey City
My Country: United States
I'm a: Knowledge Seeker
Posts: 1
Default Re: New Members - please post your introductions here

Hello

I am in repair feild for quite some time my main repair feild is Apple products.
iasif is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2021
Powered by vBulletin ®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 10:13 AM.
Did you find this forum helpful?