Go Back   Badcaps Forums > General Topics > General Capacitor Questions & Issues
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 11-25-2018, 02:11 PM   #1
Badcaps Veteran
Join Date: Jul 2011
City & State: Sunny Jacksonville FL
My Country: USA
Line Voltage: 120 Volts 60 HZ
I'm a: Knowledge Seeker
Posts: 1,214
Default DBK brand of 18650 l-ion cell rating on cell 3350

It looks like I put this in the wrong forum if it is please move it to right one thanks

Most of the time the non brands of cells fall very short of what it says on the cells milliamperes

Not in this case useable milliamperes 2500 and that is where the amperage is still at about 1 amp load

The battery tester that I am using cuts off at 300 milliamperes
Cut off showing 2964

To me that pretty good

I got these battery packs at Walmart Black Friday sale on Thursday night $15.00

These batteries were in the device in the photo below

I was going to use these cells for my LED yard light project but I am having second thought on this

I have some other cells that I going to test that I might use instead with lower milliamperes rating some Chinese cells that I have because these cells are being used outside I really do not have real use for them I think if they show 1500 milliamperes I would be surprised

I have some pouch stile batteries that are rated at 4000 milliamperes which they do every bit of it four of these cells in parallel will take the place of six 18650 cells
Attached Images
File Type: jpeg 9CDD4C9D-EB3F-4A1C-92EE-DB0B13137507.jpeg (355.4 KB, 9 views)
9 PC LCD Monitor
6 LCD Flat Screen TV
30 Desk Top Switching Power Supply
10 Desk Top Power Supply
10 Battery Charger Switching Power Supply for Power Tool
6 18v Lithium Battery Power Boards for Tool Battery Packs
1 XBox 360 Switching Power Supply and M Board
25 Servo Drives 220/460 3 Phase
6 De-soldering Station Switching Power Supply 1 Power Supply
1 Dell Mother Board
15 Computer Power Supply
1 HP Printer Supply & Control Board * lighting finished it *

These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

1 Over Head Crane Current Sensing Board
2 Hem Saw Computer Stack Board

All of these had CAPs POOF
All of the mosfet that are taken out by bad caps

Last edited by sam_sam_sam; 11-25-2018 at 02:36 PM..
sam_sam_sam is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:47 AM.
Did you find this forum helpful?