Badcaps.net Forum
Go Back   Badcaps Forums > General Topics > General Computer Discussion
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 01-07-2014, 07:21 AM   #21
kc8adu
Super Moderator
 
kc8adu's Avatar
 
Join Date: Nov 2003
City & State: dayton ohio
My Country: U.S.A!
Line Voltage: 12vdc,120/240vac,480vac 3ph on my bench
I'm a: Professional Tech
Posts: 8,268
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

too good of caps?

Quote:
Originally Posted by tmiha71 View Post
Nice thread, but I see lot of Panasonic's FJ caps...
If there are at the rear USB connectors, I would replace them with Rubycon XYG 8x11 1000uF, even used ones are good for that place...

Reason for replacement - too good caps (??), on wrong place ...

To add, through time, inductive, capacitive, or even resistive bond is created, and is main cause of that behavior...
Most likely some caps died, and can not swallow current... And because they're FJ's - most likely PSU caps took big hit...
kc8adu is offline   Reply With Quote
Old 01-07-2014, 11:49 PM   #22
momaka
Badcaps Veteran
 
momaka's Avatar
 
Join Date: May 2008
City & State: VA (NoVA)
My Country: U.S.A.
Line Voltage: 120 VAC, 60 Hz
I'm a: Hobbyist Tech
Posts: 8,699
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Quote:
Originally Posted by kc8adu View Post
x2

I don't see how "too good of caps" would cause a problem either. The PSU's wires have enough resistance so that the PSU never really "sees" the low ESR of those "too good caps" on the motherboard.
momaka is offline   Reply With Quote
Old 01-08-2014, 05:20 AM   #23
tmiha71
Senior Member
 
Join Date: Apr 2010
Posts: 130
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

That's for sure, that PSU wires have higher resistance than traces on mobo....

ROFL
tmiha71 is offline   Reply With Quote
Old 01-26-2014, 02:45 PM   #24
fu-raz
New Member
 
Join Date: Jan 2014
City & State: Almere
My Country: Netherlands
I'm a: Knowledge Seeker
Posts: 5
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

This helped me fix my Asus P5E deluxe. It also had the Chassis Intruded fatal error. Took me only a few seconds to find the right transistor, thanks to the directions.

It's not perfect yet. Is it possible that my 3.3v point comes on too late? If I do a cold boot it gives me the error, but when I reset everything is fine.

Anyway, I wanted to say thanks and give people looking for a solution for their P5E deluxe some directions. So I added a picture of the fix for the P5E deluxe. The transistor is located in the bottom left corner of the motherboard. Underneath the winbond chip.
Attached Images
File Type: jpg SAM_3635.jpg (641.3 KB, 256 views)
fu-raz is offline   Reply With Quote
Old 01-27-2014, 12:33 PM   #25
Th3_uN1Qu3
Believe in
 
Join Date: Jul 2010
City & State: Bucharest
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Professional Tech
Posts: 5,359
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

I see you pulled 3.3v from a resistor. Maybe that's part of some other circuit and it takes a little while to charge. Try finding a capacitor with 3.3v on it, that should charge up quickly (as it'll be directly across a 3.3v regulator) and it should work on a cold boot as well.

The capacitors are the brown colored parts with no marking on them.
__________________
Quote:
Originally Posted by PeteS in CA View Post
Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
A working TV? How boring!

Last edited by Th3_uN1Qu3; 01-27-2014 at 12:36 PM..
Th3_uN1Qu3 is offline   Reply With Quote
Old 01-28-2014, 12:59 PM   #26
fu-raz
New Member
 
Join Date: Jan 2014
City & State: Almere
My Country: Netherlands
I'm a: Knowledge Seeker
Posts: 5
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Thanks, I'll find another spot and post the picture. If it goes into hibernation or sleep mode now, I can't get the computer to turn back on heheh

Still, this is a lot better than Chassis Intruded: Fatal Error...
fu-raz is offline   Reply With Quote
Old 01-29-2014, 05:14 AM   #27
fu-raz
New Member
 
Join Date: Jan 2014
City & State: Almere
My Country: Netherlands
I'm a: Knowledge Seeker
Posts: 5
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

I found a new spot, but it seems that I can't get my computer to wake up anymore if it goes to sleep, and also it doesn't want to turn off anymore. Could this have something to do with it? Should I just find an alternate point again?
fu-raz is offline   Reply With Quote
Old 01-29-2014, 05:50 AM   #28
Th3_uN1Qu3
Believe in
 
Join Date: Jul 2010
City & State: Bucharest
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Professional Tech
Posts: 5,359
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Shouldn't happen. What happens when you try to turn the computer off? Do the fans remain spinning?

Try to clear CMOS again and also clean that area on the board well using isopropyl alcohol and a toothbrush.
Th3_uN1Qu3 is offline   Reply With Quote
Old 01-29-2014, 06:12 AM   #29
fu-raz
New Member
 
Join Date: Jan 2014
City & State: Almere
My Country: Netherlands
I'm a: Knowledge Seeker
Posts: 5
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Yes, the fans remain spinning. I'll clear the CMOS again and I'll clean the board.
fu-raz is offline   Reply With Quote
Old 01-29-2014, 12:07 PM   #30
fu-raz
New Member
 
Join Date: Jan 2014
City & State: Almere
My Country: Netherlands
I'm a: Knowledge Seeker
Posts: 5
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

So, there we go... Thanks for the help Th3_uN1Qu3! Found a new 3.3v point, cleaned the board and reset the CMOS. Everything is working now.

In the attachment is my final solution for the Asus P5E Deluxe
Attached Images
File Type: jpg SAM_3636.jpg (594.6 KB, 250 views)
fu-raz is offline   Reply With Quote
Old 01-29-2014, 12:58 PM   #31
Th3_uN1Qu3
Believe in
 
Join Date: Jul 2010
City & State: Bucharest
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Professional Tech
Posts: 5,359
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Good job! Another board saved from the landfill.
Th3_uN1Qu3 is offline   Reply With Quote
Old 02-13-2014, 09:25 PM   #32
wasay345
New Member
 
Join Date: Jan 2014
City & State: karachi
My Country: pakistan
I'm a: Knowledge Seeker
Posts: 1
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

can u plz help me my motherboard is P5k-VM
and i also get the same problem (chassis intruded fatal error system halted)
dont know how to fix that :/
wasay345 is offline   Reply With Quote
Old 04-01-2014, 05:06 PM   #33
jimmyd
New Member
 
Join Date: Mar 2014
City & State: Fort Walton Beach,Florida
My Country: USA
I'm a: Knowledge Seeker
Posts: 1
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

I know this is an old thread but I have a P5E3 with same problem. My chassis intrusion connector is by the front panel header and the board power LED and the super I/O controller is in the top corner like the P5KE shown but no transistors are near it. Can anyone help me identify the correct sot-23 on my board? I certainly would appreciate it. There are 4 transistors surrounding the intrusion connector but none are marked sot-23.
jimmyd is offline   Reply With Quote
Old 04-04-2014, 12:30 AM   #34
momaka
Badcaps Veteran
 
momaka's Avatar
 
Join Date: May 2008
City & State: VA (NoVA)
My Country: U.S.A.
Line Voltage: 120 VAC, 60 Hz
I'm a: Hobbyist Tech
Posts: 8,699
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Quote:
Originally Posted by jimmyd View Post
There are 4 transistors surrounding the intrusion connector but none are marked sot-23.
SOT-23 is just the package specification (look up SOT-23 on Google images and you will see what I mean). The actual marking on the transistor will vary, depending on what it is.

Last edited by momaka; 04-04-2014 at 12:31 AM..
momaka is offline   Reply With Quote
Old 07-28-2014, 09:22 AM   #35
gn2
New Member
 
Join Date: Dec 2013
City & State: Kingston
My Country: Canada
I'm a: Knowledge Seeker
Posts: 4
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

I have seen this error on a P6T Deluxe V2 socket 1366 motherboard, is it likely the same solution ?
Also, it appears that cleaning the board well could resolve this as well, is that correct ?

As old as this thread is, its the first solution I've seen, in a LOT of looking, that seems to delineate the exact CAUSE of the fault. Very, very useful information.

Thanks very much to the OP, btw !
gn2 is offline   Reply With Quote
Old 07-28-2014, 11:09 AM   #36
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 20,108
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

try replacing the jumper that bypasses the chassis switch
stj is offline   Reply With Quote
Old 08-07-2014, 12:47 PM   #37
Vishwasjoistmk
New Member
 
Join Date: Jun 2014
City & State: Tumkur
My Country: India
I'm a: Knowledge Seeker
Posts: 1
Thumbs up Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Have an easier workaround, following are the steps :

<1> Remove the front USB and audio connectors from MB
<2> Remove the reset switch connector
<3> Reset BIOS using the Jumper / removing CMOS
<4> Reset BIOS Settings and reboot your PC and things should be Up and running.

Let me know if this works for you too.
Vishwasjoistmk is offline   Reply With Quote
Old 08-14-2014, 11:42 AM   #38
formybhe
New Member
 
Join Date: May 2014
City & State: Quezon
My Country: Philippines
I'm a: Knowledge Seeker
Posts: 1
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

got same problem on my P8h61-m2, help me please! tia
formybhe is offline   Reply With Quote
Old 09-01-2014, 08:15 AM   #39
bobbymih
New Member
 
Join Date: Aug 2014
City & State: Prahova
My Country: Romania
I'm a: Knowledge Seeker
Posts: 2
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Th3_uN1Qu3

Please help me with my PK5 DELUXE mother board that surely need that "remove transitor fix" cant know for sure wich one is it and i don't wanna mess something up.

Thanks
bobbymih is offline   Reply With Quote
Old 09-01-2014, 08:21 AM   #40
Th3_uN1Qu3
Believe in
 
Join Date: Jul 2010
City & State: Bucharest
My Country: Romania
Line Voltage: 230VAC 50Hz
I'm a: Professional Tech
Posts: 5,359
Default Re: [HOWTO] Fix/Repair "Chassis Intruded Fatal Error System Halted" on Asus P5QL

Please post clear pictures of the mainboard and a close-up of the Winbond chip area.
Th3_uN1Qu3 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:37 AM.
Did you find this forum helpful?