Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Equipment Usage, Soldering, Techniques, and Reviews
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 01-10-2019, 10:48 AM   #21
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,833
Default Re: Tools / technique for boards with eMMC repair?

This vid is interesting, how he flashed the eMMC on board.
https://www.youtube.com/watch?v=Ff4S9Z2phIE
CapLeaker is offline   Reply With Quote
Old 02-15-2019, 01:22 PM   #22
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,833
Default Re: Tools / technique for boards with eMMC repair?

It is possible to flash the EMMC with the programmer off the board and then solder the flashed EMMC to the board. I proved that. No problems.
CapLeaker is offline   Reply With Quote
Old 02-15-2019, 10:24 PM   #23
megaraider
Senior Member
 
Join Date: Jul 2015
City & State: Porto
My Country: Portugal
I'm a: Hobbyist Tech
Posts: 126
Default Re: Tools / technique for boards with eMMC repair?

Quote:
Originally Posted by CapLeaker View Post
It is possible to flash the EMMC with the programmer off the board and then solder the flashed EMMC to the board. I proved that. No problems.


Next step will be to read (and write if needed) without removing the eMMC from the board (ISP)...
megaraider is offline   Reply With Quote
Old 02-16-2019, 06:46 AM   #24
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,833
Default Re: Tools / technique for boards with eMMC repair?

Quote:
Originally Posted by megaraider View Post


Next step will be to read (and write if needed) without removing the eMMC from the board (ISP)...
I am not sure if you did read this thread: https://www.badcaps.net/forum/showthread.php?t=74150

As long as the EMMC itself is good, I can read and write from and to it without taking it off the board. That is, IF one knows where to hook up the wires to. I have already proofed that in that thread above.
CapLeaker is offline   Reply With Quote
Old 02-18-2019, 09:26 PM   #25
megaraider
Senior Member
 
Join Date: Jul 2015
City & State: Porto
My Country: Portugal
I'm a: Hobbyist Tech
Posts: 126
Default Re: Tools / technique for boards with eMMC repair?

Quote:
Originally Posted by CapLeaker View Post
I am not sure if you did read this thread: https://www.badcaps.net/forum/showthread.php?t=74150
I can read and write from and to it without taking it off the board.
I hadn't read that thread earlier.
Then it's done: you've proved it to be possible in both ways
megaraider is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:20 PM.
Did you find this forum helpful?