Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Computer Displays
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-04-2018, 03:04 AM   #21
MicroBell1
Member
 
Join Date: Jan 2013
City & State: Carmichaels PA
My Country: USA
I'm a: Knowledge Seeker
Posts: 29
Default Re: BenQ Q22W6 Capacitor Replacement

Sorry rddube as I meant to get back sooner with those numbers but it's been a busy week. Anyway I did get a new meter and tested those points again and they are reading 396 ohms and 392 ohms which I think you referred to as Ok as they were in the ball park.

If not let me know...but unless you have another idea or area to check on that board I guess I'll have to try constructing a CCFL tester per Budm's thread and see if those are a problem. Was really hoping those bad capacitors were the problem but it looks like something else and with all the new meter, new soldering tools..etc this project is becoming cost ineffective.......lol

I still have some questionable solder joints to go over and re-float but I'm not pinning any high hopes that it's the issue but we will see. Thank you for all your input and advise on this issue!.


Any clue what those 2 transformers (L602, T601 on the board) should read on the pins?

Last edited by MicroBell1; 05-04-2018 at 03:10 AM..
MicroBell1 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:09 AM.
Did you find this forum helpful?