Hi everyone,
I had a Netgear ProSafe 24 ports 10/100 Switch, model # JFS524 that has some network connections is defective. I would like to know if i can repair or change some parts on the board to recover my switch.
I had took some pictures of the motherboard here they are:
Any help is appreciated. Thanks.
EDIT: I fully tested the switch; and here the ports that don't work.
PORT #17 always ON light 1 of 2 (Light 1 is LINK/ACT)
Port #2,
Port #17
Port #18
not working at all.
All the other ports is working.
I can took electronics microscope of some parts if needed. I had an 2MP microscope 1080P.
I had a Netgear ProSafe 24 ports 10/100 Switch, model # JFS524 that has some network connections is defective. I would like to know if i can repair or change some parts on the board to recover my switch.
I had took some pictures of the motherboard here they are:
Any help is appreciated. Thanks.
EDIT: I fully tested the switch; and here the ports that don't work.
PORT #17 always ON light 1 of 2 (Light 1 is LINK/ACT)
Port #2,
Port #17
Port #18
not working at all.
All the other ports is working.
I can took electronics microscope of some parts if needed. I had an 2MP microscope 1080P.
Comment