Hello, there is a problem with my motherboard, it does not start. Same model
PIN 2 0.0v
PIN 37 3.23V ECRST
PIN 122 0.40V CRY1
PIN 123 1.59V CRY2
these pins are correct
but the voltages in all the pacakges of the bios chip are ok, but there is no 3.3 volts in the 1st leg and this volt is not available in the I / o 128 pins I wrote bios but I did not replace it with yensi.
PIN 2 0.0v
PIN 37 3.23V ECRST
PIN 122 0.40V CRY1
PIN 123 1.59V CRY2
these pins are correct
but the voltages in all the pacakges of the bios chip are ok, but there is no 3.3 volts in the 1st leg and this volt is not available in the I / o 128 pins I wrote bios but I did not replace it with yensi.