Pioneer Kuro PDP-LX5090 - Round II

[Katona78]

Re: Pioneer Kuro PDP-LX5090 - Round II

I have sent you a PM - I offer service on these units.

City & State: Budapest
My Country: Magyarország
I'm a: Knowledge Seeker
Posts: 2
Default Re: Pioneer Kuro PDP-LX5090 - Round II
I don't really understand instrumental measurement but I'll check it out with someone. I thought someone here on the forum had the same problem and knows specifically what the mistake is. Thanks for the suggestion and I look at the psu output of the Y drive
Katona78 is online now Report Post Reply With Quote Multi-Quote This Message Quick reply to this message
Reply

[Katona78]

Re: Pioneer Kuro PDP-LX5090 - Round II

Check PSU output to Ydrive before it clicks off.

City & State: Budapest
My Country: Magyarország
I'm a: Knowledge Seeker
Posts: 2
Default Re: Pioneer Kuro PDP-LX5090 - Round II
I don't really understand instrumental measurement but I'll check it out with someone. I thought someone here on the forum had the same problem and knows specifically what the mistake is. Thanks for the suggestion and I look at the psu output of the Y drive
Katona78 is online now Report Post Reply With Quote Multi-Quote This Message Quick reply to this message
Reply

[ReeceyBurger123]

Re: Pioneer Kuro PDP-LX5090 - Round II

City & State: Budapest
My Country: Magyarország
I'm a: Knowledge Seeker
Posts: 2
Default Re: Pioneer Kuro PDP-LX5090 - Round II
I don't really understand instrumental measurement but I'll check it out with someone. I thought someone here on the forum had the same problem and knows specifically what the mistake is. Thanks for the suggestion and I look at the psu output of the Y drive
Katona78 is online now Report Post Reply With Quote Multi-Quote This Message Quick reply to this message
Reply

Okay

[ljubisa86]

Re: Pioneer Kuro PDP-LX5090 - Round II

So, Simon drove about 600 miles there and back to Poole to pick up a PDP-LX5090... I thought he was nuts... but it was an 8 blue blinker, so worth it.

It was that same 1.8V regulator on it. Replaced that and it works absolutely perfectly. Another 9G KURO saved.

Interestingly, the panel has about 22,000 hours on it (mine had 11,500 hrs) ... and not a lick of burn in. Has great black level performance and hardly any red tint - I suspect the previous owner has tweaked this panel, as all the voltages are adjusted from the nominal rating. They've done a good job, thankfully they've not reset the panel (which really makes for an awkward fix.)

Internal pics (first one of the reg causing all the issues):
http://i.imgur.com/8BmCFXN.jpg
http://i.imgur.com/tnXc3WI.jpg
http://i.imgur.com/syyI7vh.jpg
http://i.imgur.com/jRzDgon.jpg
http://i.imgur.com/g37txzj.jpg
http://i.imgur.com/yDRE2Ae.jpg
http://i.imgur.com/zEHZjQn.jpg
http://i.imgur.com/YvcVGuS.jpg
http://i.imgur.com/5PxCX1a.jpg

Hello my friend,

i have the exact tv with the exact problem. if u turn it on it will work for hours, if off then will not turn on. i replace the regulator on the AV board, and all the capacitors in the PS board.
Any ideas?