Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Samsung LN55B650T1FXZA no backlight

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung LN55B650T1FXZA no backlight

    TV have sound but no backlight.
    I can see image in the dark with a flashlight.
    If disconnect the main board - PSU cable nothing happen.
    LD: 12.35v
    FB1 and FB2: 0v
    Attached Files

    #2
    Re: Samsung LN55B650T1FXZA no backlight

    1) Did you find out if you have BL-ON signal to turn on the backlights circuit or not?
    2) Do you have about 380~390vdc between the + and - legs of either one of the two main filter caps?
    3) The fuse in the middle of the board which is for the inverter circuit is good?
    4) Did you see the backlights even come on for seconds if you at the screen in the dark room?
    5) the white rectangular cap with 2h684K has the correct capacitance?
    LD Voltage is find, >11V = good, <10V = bad
    FB1 and FB2 are very low AC feedback Voltage, they are not present at this point because the backlights are not on.
    I cannot read the power supply board P/N, it looks like BN44- 00???
    Last edited by budm; 05-11-2017, 07:06 PM.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: Samsung LN55B650T1FXZA no backlight

      Inv-On: 5.1v
      Main Caps: 386v
      Fuse: Ok
      Backlight never come
      Cap 2H684K: 9.5nf ?????
      Power Supply model: BN44-00268A

      Comment


        #4
        Re: Samsung LN55B650T1FXZA no backlight

        684K = 0.68uF 10% tolerance
        Did you remove it and measure it off the board?
        Attached Files
        Last edited by budm; 05-12-2017, 02:15 PM.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment


          #5
          Re: Samsung LN55B650T1FXZA no backlight

          I measured outside
          Attached Files

          Comment


            #6
            Re: Samsung LN55B650T1FXZA no backlight

            If that reading is correct then it's faulty and you need to replace it. Plenty on Ebay.
            Willing to help but I'm no expert.

            Comment


              #7
              Re: Samsung LN55B650T1FXZA no backlight

              Originally posted by alfredomfr1 View Post
              I measured outside
              Well, you found the cause of the problem.
              BTW, do you see any bulging on the sides of that cap?
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment


                #8
                Re: Samsung LN55B650T1FXZA no backlight

                No bulging on the sides of the capacitor.
                I will order a new one and let you guys know what happen
                Thanks for the help

                Comment


                  #9
                  Re: Samsung LN55B650T1FXZA no backlight

                  Capacitor Replaced: TV working good again
                  Thanks budm and D Barton

                  Comment


                    #10
                    Re: Samsung LN55B650T1FXZA no backlight

                    Thanks for the update glad the capacitor fixed the issue.

                    Comment


                      #11
                      Re: Samsung LN55B650T1FXZA no backlight

                      same model, same problem, same bad cap 0.684n

                      Comment


                        #12
                        Re: Samsung LN55B650T1FXZA no backlight

                        video of it https://www.youtube.com/watch?v=ibnj4DMVtGE

                        Comment

                        Working...
                        X