Announcement

Collapse
No announcement yet.

Asus model N752V motherboard N752VX rev. 2.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Asus model N752V motherboard N752VX rev. 2.0

    This laptop comes dead.
    I checked PCH shorted, so after replacing it I get 3,3V 5V and other voltages except of two CPU rails as picture show.
    Seems not have other shorted components.
    I haven't schematic or boardviewer.
    After plugged PSU motherboard turns on itself with 3 leds on.
    Power consumption is 0,45A
    Attached Files

    #2
    Re: Asus model N752V motherboard N752VX rev. 2.0

    Likely +VCC_Core Missing and +VCC_GT, what you can ignore at this Point.

    I'd exclude corrupted BIOS at this Point. Is there a CMOS Battery present?
    FairRepair on YouTube

    Comment


      #3
      Re: Asus model N752V motherboard N752VX rev. 2.0

      Bios flashed too.
      Possible causes about missing voltages?

      Comment


        #4
        Re: Asus model N752V motherboard N752VX rev. 2.0

        Missing Enable Signal, Dead VRM Controller, Dead Driver, Missing SVID communication, etc.
        FairRepair on YouTube

        Comment


          #5
          Re: Asus model N752V motherboard N752VX rev. 2.0

          Originally posted by valieromarco View Post
          Bios flashed too.
          Possible causes about missing voltages?
          Repair Guide - https://www.badcaps.net/forum/showth...ghlight=N752VX
          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

          Comment


            #6
            Re: Asus model N752V motherboard N752VX rev. 2.0

            Solved
            Flashed bios with a clear ME Region, now it working perfectly

            Comment


              #7
              Re: Asus model N752V motherboard N752VX rev. 2.0

              sorry, out of topic, but how did you know the PCH is shorted?

              Comment


                #8
                Re: Asus model N752V motherboard N752VX rev. 2.0

                Originally posted by valieromarco View Post
                Solved
                Flashed bios with a clear ME Region, now it working perfectly
                I have the same situation on my card, hm and I/O short-circuit both changed, I programmed kbc, but 0.35a lights are on, no processor voltages, I would appreciate if you could share your bios file

                Comment

                Working...
                X