![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Join Date: Jul 2015
City & State: austin, tx
My Country: usa
I'm a: Knowledge Seeker
Posts: 3
|
![]() He there I have a Soyo with an Emax PWR0502204001.
Trying to find the name of the following caps(attachments), but I can't determine what they are. And the schematic on this page is too small for my bad eyesite. http://www.emax-co.com/english/produ...23&sup_no=1714 Can someone please help me identify the caps on the attached image? Thanks |
![]() |
![]() |
![]() |
#2 |
Badcaps Veteran
Join Date: Sep 2009
City & State: North Coast, NSW
My Country: Australia
Line Voltage: 240V 50Hz
I'm a: Professional Tech
Posts: 5,053
|
![]() That is not a proper schematic on that page, and it doesn't tell you what the caps are. All it tells you is the physical dimensions of the PCB. You will have to take the board out and see what your one has.
__________________
I love putting bad caps and flat batteries in fire and watching them explode!! No wonder it doesn't work! You installed the jumper wires backwards ![]() Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro |
![]() |
![]() |
![]() |
#3 |
New Member
Join Date: Oct 2018
City & State: London
My Country: UK
I'm a: Knowledge Seeker
Posts: 3
|
![]() They are 16V 1000uF for anyone coming across this now. I have the same board and these failed, replacing them gave it another 2 years of life.
Now unfortunately it blows the household circuit breaker when connected to the mains so I'm trying to figure out what else has failed on the board! |
![]() |
![]() |
![]() |
#4 |
New Member
Join Date: Oct 2018
City & State: London
My Country: UK
I'm a: Knowledge Seeker
Posts: 3
|
![]() I can't edit my post unfortunately.
Does anyone know what voltage the backlight LEDs run at? I am wondering if I could hook up a 12v and 5v supply to the monitor and use them to directly power the video board and backlights. Does this sound sensible? I can't find anywhere to get a replacement board. |
![]() |
![]() |
![]() |
#5 |
Badcaps Veteran
Join Date: Dec 2008
City & State: Owensboro, KY.
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Professional Tech
Posts: 1,666
|
![]() 3 year old Necro posting, start a new thread give lots of pics and ask a detailed question.
|
![]() |
![]() |
![]() |
#6 |
Badcaps Veteran
Join Date: Dec 2008
City & State: Owensboro, KY.
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Professional Tech
Posts: 1,666
|
![]() FYI if it's blowing a household breaker it because you have too much load on that breaker.
|
![]() |
![]() |
![]() |
#7 |
New Member
Join Date: Oct 2018
City & State: London
My Country: UK
I'm a: Knowledge Seeker
Posts: 3
|
![]() Thanks, I'll do that.
When I say it blows the household breaker, I mean it gives off a loud bang, the integrated fuse blows across the room and the breaker flips. I presume there is a dead short on my board but my electronics knowledge + multimeter is not good enough to diagnose it. I will make another post in this forum. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|