HP DMI Tool NBDmiFit

[Murtaza527]

thanks but my problem not solve its happen with me many time i tried to read file which is using hp in 840 G3 and G4 that is 25Q64JV and 25Q128JV

my programmer read this but if i read from original bios IC and i write on anyother bios IC

that is not working above file also i read but not which file you provide i try to write but after that laptop just restarting every time not properly on can anyone tell me about this bios chip how i can read and write perfectly
i have two programmer

RT809F ISP Programmer and SOFi SP16-B Professional Programmer

[bps123]

Originally Posted by ala_borbe

thank you for info, i did not know this... it will sure help

smc.bin file not failure in hp 840g2

[ManniLudde]

Hello,

i hope this is the right Thread. Is it possible to change my serial Number on my Elitebook 850 G5? If so, is there any Tutorial which VErsion of the DMI Tool i need. I tried the HP BCU 4.0.25.1 Tool, there i can only change the bios options and not the Serial. Thx for ur Help!

[SMDFlea]

Originally Posted by ManniLudde

Hello,

i hope this is the right Thread. Is it possible to change my serial Number on my Elitebook 850 G5? If so, is there any Tutorial which VErsion of the DMI Tool i need. I tried the HP BCU 4.0.25.1 Tool, there i can only change the bios options and not the Serial. Thx for ur Help!

Try WnDmifit from windows,its included in the nbdmifit folder.Try any version from 2.10 on the first page of this thread.

[ManniLudde]

Thank u, which Tool do i have to use to change the serial number, the BiosConfigUtility64.exe? I used the BiosConfigUtility64.exe from the HP BCU Toolkit sp88497.exe. There it wasnt possible the change the serial number, uuid etc. it was read only.

[ManniLudde]

Hi,

when i try running the wndmifit64.exe the following error is shown:

"MPM is not unlocked. Will not be able to set BIOS settings. Please escalate with the UUID to get SMC blob to unlock MPM.

Can anybody plz help me?

[ugore]

is there any tool that supports proone G3 AIO?

[ManniLudde]

What do u mean, inside the DMI Toolset?

[blacksun-encoder]

hello friends,

i have a problem with my hp 17-y055ng. at startup the noteboosk shows serveral problems with product information, system board ct and so on. all i have repaired with the tool NbDmiFit V2.13. The errors will not be shown at startup.

but in the bios on the first side, there is a "born on date" with ÿÿ/ÿÿ/ÿÿÿÿ

How can i change this too?

Please help me and sorry for my bad english.

[SMDFlea]

Originally Posted by blacksun-encoder

hello friends,

i have a problem with my hp 17-y055ng. at startup the noteboosk shows serveral problems with product information, system board ct and so on. all i have repaired with the tool NbDmiFit V2.13. The errors will not be shown at startup.

but in the bios on the first side, there is a "born on date" with ÿÿ/ÿÿ/ÿÿÿÿ

How can i change this too?

Please help me and sorry for my bad english.

http://********/viewtopic.php?f=53&t=10021&start=80

english translation -


Born On Date (Warranty Start Date)

New version of the utility launched with the / clrwsd or / CLRWSD flag
(case is significant, and only two of these options are allowed)
clears the start date of the warranty period to 00/00/0000.

To correct this incident, we translate the system time to the time we need,
Install HP Support Assistant, turn off the Internet, and simply launch
% ProgramFiles (x86)% \ Hewlett-Packard \ HP Support Framework \ Warranty \ HPWSD.exe.

When rebooting, go to the BIOS and enjoy the result.

PS I do not attach HPWSD.exe, because without installing HP Support Assistant in the system
The utility is non-functional, apparently because of the HPSF services that work with WMI.

[blacksun-encoder]

Thanks for your reply.

but what means "new version of the utility launched with /clrwsd. Which version of nbdmifit is here meaning?

i have wrote the serial number and model number with windmifit under windows and not with the dos boot usb pen.

[imranromi]

Originally Posted by blacksun-encoder

hello friends,

i have a problem with my hp 17-y055ng. at startup the noteboosk shows serveral problems with product information, system board ct and so on. all i have repaired with the tool NbDmiFit V2.13. The errors will not be shown at startup.

but in the bios on the first side, there is a "born on date" with ÿÿ/ÿÿ/ÿÿÿÿ

How can i change this too?

Please help me and sorry for my bad english.

1 condition if you have old bios save post here and how to come this error?

[imranromi]

Or use tool hp BCU.. i think all bios data show in windows i remove many time error (Manufacture programming mode is unlock) i open cmd and type something have youtube video for support.
https://www.youtube.com/watch?v=UhjdPWlyX-0
Try this methods when save file open if you see sn,pn i think is show bios date.00/00/0000.

[myjyd]

Thank you

[winx62]

I have an HP 280 G2 SFF PC
2.13 when booted says "does not support this platform"
Does anyone have a newer release?
Thanks so much. This is a very informative forum.

[chrisj979]

Originally Posted by winx62

I have an HP 280 G2 SFF PC
2.13 when booted says "does not support this platform"
Does anyone have a newer release?
Thanks so much. This is a very informative forum.

I have a similar question how do I make it bootable so I can run NbDmiFit.bat? Creating a Win 8 PE boot disk from ADK it says cannot execute program, Win 10 PE says it "does not support this platform.

[jasko_jacker]

Use tool as rufus or similar , it's an open version of old dos

[bakre]

Thanks for every one

[pmudzengi22]

Guys. Can I have detailed instructions on how to add system info on the HP 625.

[ccannon]

I am looking for a dmi to help me with an All-In-One manufactured around 2017. Haven't had any luck locating it.