Hi,
i have a Dell E196FPf monitor that showed a very "low light" picture.
i mean that i had to turn off all the lights in my room to hardly see what's on the screen.
so i opened it and saw 2 220uF 25V bad cap's, i replaced them with 2 330uF 25V caps (this is what i had and i understood that i can replace the 220uF caps with up to 440uF caps with same Voltage).
after that, i turned it on and all the screen is white, the light is ok, but white screen is all what i got.
what should i check more?
here's some pictures of the board:
thank you,
Oren.
i have a Dell E196FPf monitor that showed a very "low light" picture.
i mean that i had to turn off all the lights in my room to hardly see what's on the screen.
so i opened it and saw 2 220uF 25V bad cap's, i replaced them with 2 330uF 25V caps (this is what i had and i understood that i can replace the 220uF caps with up to 440uF caps with same Voltage).
after that, i turned it on and all the screen is white, the light is ok, but white screen is all what i got.
what should i check more?
here's some pictures of the board:
thank you,
Oren.
Comment