Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 11-15-2019, 11:40 AM   #1
grosseader
New Member
 
Join Date: Nov 2019
City & State: SMK
My Country: BUL
I'm a: Knowledge Seeker
Posts: 7
Default E1-571 ( LA-7912p) No post

Hi fellows. I'm trying to revive my mom's E1-571 ( LA-7912p) i5 and HD4000 Full specs here

Laptop doesn't have visible or known issues like liquid damage or overheating.
One evening shut down went normal and in the morning:
Device won't post/boot.
-Disassembled and made hard resset.
-When press power on after electrical discharging,
device turn fan on, power LED light up, CD rom make check noises, all that for 3 seconds , nothing on screen no even backlit.

If i press power button again ONLY power led light up for 3-5secs and goes off again.

If remove power supply and try again, first scenario once and, keeps same.

Flashed both bios chips, no difference!
Any suggestions and help will be appreciated. I have schematics of motherboard. What to look for?
grosseader is offline   Reply With Quote
Old 11-15-2019, 12:09 PM   #2
caspian
Badcaps Veteran
 
Join Date: Oct 2015
City & State: Mainboard
My Country: Laptop
I'm a: Hobbyist Tech
Posts: 1,276
Default Re: E1-571 ( LA-7912p) No post

Do the CPU and the PCH get warm after turning the laptop on?
caspian is offline   Reply With Quote
Old 11-15-2019, 02:40 PM   #3
grosseader
New Member
 
Join Date: Nov 2019
City & State: SMK
My Country: BUL
I'm a: Knowledge Seeker
Posts: 7
Default Re: E1-571 ( LA-7912p) No post

Quote:
Originally Posted by caspian View Post
Do the CPU and the PCH get warm after turning the laptop on?
No, they doesn't. For 3-5secs no change in temperature.
I was thinking on that and tried to start it 10+ times and was checking for any activity (warm up) but, none occured.
grosseader is offline   Reply With Quote
Old 11-15-2019, 10:44 PM   #4
mcplslg123
Badcaps Veteran
 
Join Date: Jun 2015
City & State: siliguri
My Country: india
Line Voltage: 220vac,60hz
I'm a: Professional Tech
Posts: 2,295
Default Re: E1-571 ( LA-7912p) No post

Check U21/U22 for +3v VS/+5V VS. This mobo is known to have fault on VS lines.
mcplslg123 is offline   Reply With Quote
Old 11-16-2019, 02:04 AM   #5
grosseader
New Member
 
Join Date: Nov 2019
City & State: SMK
My Country: BUL
I'm a: Knowledge Seeker
Posts: 7
Default Re: E1-571 ( LA-7912p) No post

Those voltages i have, ONLY on 1st start after hard reset, afyer that, only power on led blink, no fan, no voltages.


Last edited by grosseader; 11-16-2019 at 02:08 AM..
grosseader is offline   Reply With Quote
Old 11-16-2019, 12:03 PM   #6
grosseader
New Member
 
Join Date: Nov 2019
City & State: SMK
My Country: BUL
I'm a: Knowledge Seeker
Posts: 7
Default Re: E1-571 ( LA-7912p) No post

Quote:
Originally Posted by mcplslg123 View Post
Check U21/U22 for +3v VS/+5V VS. This mobo is known to have fault on VS lines.
Ignore above post. Sorry, this morning was in a hurry and i got wrond readings.
U21 and U22 are fine, voltages are OK.

I've checked whole +3VALW net, and it is OK.

I have board view also. If anyone can reccomend other stuff to check-you are welcome! Meanwhile i will keep testing everything, but it is...ah... exhausting, without microscope or zoom lens .... but i'll keep going.

P.s: Can some moderator delete mine above post please!
grosseader is offline   Reply With Quote
Old 11-19-2019, 02:48 AM   #7
grosseader
New Member
 
Join Date: Nov 2019
City & State: SMK
My Country: BUL
I'm a: Knowledge Seeker
Posts: 7
Default Re: E1-571 ( LA-7912p) No post

Nothing new, nothing wrong so far. I can't fine any problems. Anyone else with ides?
grosseader is offline   Reply With Quote
Old 11-19-2019, 05:29 AM   #8
KvnTM
Badcaps Veteran
 
Join Date: May 2018
City & State: Arnstein, Bayern (Bavaria)
My Country: Germany
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 397
Default Re: E1-571 ( LA-7912p) No post

Post voltages of all power rails when on:
+CPU_CORE
+VGA_CORE
+VGFX_CORE
+0.75VS
+1.05VSDGPU
+1.05VS_VTT
+1.05VS_PCH +1.5V
+1.5VS
+1.5VSDGPU
+1.8VS
+1.8VSDGPU
+3VALW
+3VALW_EC
+3V_LAN
+3VALW_PCH
+3VS
+5VALW
+5VALW_PCH
+5VS
+VSB
+RTCVCC

Might be difficult as it turns off after a few seconds but that would give you a clue of what's going on.
KvnTM is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:53 AM.
Did you find this forum helpful?