Hello,
I need to find an alternative to load switch TPS 22924C. This is chip is ultra Small CSP-6 package quick discharge when switch is turned off. The dimensions are 0.9 mm x 1.4 mm, 0.5-mm. With RDS ON ultra small resistance (typical 20 mOhms).
The datasheet is here: https://pdf1.alldatasheet.com/datash...2924CYZPT.html
When trying to solder this chip on the board, I was not careful and destroyed the leg (pin) on the board, so soldering is not possible anymore (i.e. there is no contact).
EN voltage is 3.3V and voltage that needs to be transferred is also 3.3V
Now I need to find macroscopic alternative so I can solder legs of this alternative chip to other components on the board.
I hope you'll be able to suggest me something useful.
Thank you.
I need to find an alternative to load switch TPS 22924C. This is chip is ultra Small CSP-6 package quick discharge when switch is turned off. The dimensions are 0.9 mm x 1.4 mm, 0.5-mm. With RDS ON ultra small resistance (typical 20 mOhms).
The datasheet is here: https://pdf1.alldatasheet.com/datash...2924CYZPT.html
When trying to solder this chip on the board, I was not careful and destroyed the leg (pin) on the board, so soldering is not possible anymore (i.e. there is no contact).
EN voltage is 3.3V and voltage that needs to be transferred is also 3.3V
Now I need to find macroscopic alternative so I can solder legs of this alternative chip to other components on the board.
I hope you'll be able to suggest me something useful.
Thank you.
Comment