Badcaps.net Forum
Go Back   Badcaps Forums > General Topics > Custom Tweaks, Modifications, and Revisions
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 01-15-2019, 01:54 AM   #1
japlytic
Badcaps Veteran
 
japlytic's Avatar
 
Join Date: Oct 2005
City & State: Rockhampton, Queensland, Australia
My Country: Australia
Line Voltage: 240VAC 50Hz
I'm a: Hobbyist
Posts: 1,951
Default TV160 LCD controller tester: Self-powering mod

So that this test unit can be powered by the LCD controller without requiring an external power supply (it can handle DC input voltages as low as 5V and up to at least 12V), identical low loss Schottky diodes were fitted (cathodes to D2 cathode, one diode anode to LCD interface Pins 1/2 and the other diode anode to Pins 3/4).
On the LCD interface adaptors, the unmounted B+ diode and RC network for ground loop isolation was shunted to enable the LCD controller to power this test unit.
Note that the Main B+ from the cathode of D2 is only connected to the inputs of DC-DC converters and nowhere else; D2 anode is connected to the centre pin of the DC input jack which has no other connection.
__________________
My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
japlytic is offline   Reply With Quote
Old 01-21-2019, 09:26 AM   #2
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 3,829
Default Re: TV160 LCD controller tester: Self-powering mod

I don't have that TV160, but know what it is. Personally I wouldn't do that mod, because you'd have to make sure that the power from the main board can handle that TV160. What I am saying is that lets say the power source is marginal, it wont power the TV160. The mod may be good for big tv's main boards... dunno...
CapLeaker is offline   Reply With Quote
Old 01-21-2019, 11:12 AM   #3
stj
Great Sage 齊天大聖
 
stj's Avatar
 
Join Date: Dec 2009
City & State: Europe
My Country: some shithole run by Israeli agents
I'm a: Professional Tech
Posts: 20,104
Default Re: TV160 LCD controller tester: Self-powering mod

why not just tape a powerbank to the back of it??
stj is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 09:58 AM.
Did you find this forum helpful?