Biostar TA780G M2 HP Replacement for OST RLG 10V 1000uf

turbo · 12-06-2014, 04:49 PM

I have the above board which is faulty and the above capacitor is swollen at top. I have read on another forum a member had the same issue and replacing the cap cured his faults.

It is 8mm dia. x 13mm Long. However when I looked on the OST site it quoted the sizes for this cap to be 10mm x13 or 10 x 16 or 10 x20 which confused me further.

I have looked on RS components site and they have:
Panasonic FC and FM series
AL lXZ series
Nichicon PM, PS AND VR series

They vary in size from 8 x 16 to 8 x 20 also 10 x16 and 10 x 20

Would any of these be Aasuitable series and does it matter on the dia and length.

If none of these are a suitable replacement could you please suggest what I should fit.

Many thanks

12-06-2014, 04:49 PM	#1
turbo New Member Join Date: Dec 2014 City & State: scotland My Country: uk I'm a: Knowledge Seeker Posts: 2	Biostar TA780G M2 HP Replacement for OST RLG 10V 1000uf I have the above board which is faulty and the above capacitor is swollen at top. I have read on another forum a member had the same issue and replacing the cap cured his faults. It is 8mm dia. x 13mm Long. However when I looked on the OST site it quoted the sizes for this cap to be 10mm x13 or 10 x 16 or 10 x20 which confused me further. I have looked on RS components site and they have: Panasonic FC and FM series AL lXZ series Nichicon PM, PS AND VR series They vary in size from 8 x 16 to 8 x 20 also 10 x16 and 10 x 20 Would any of these be Aasuitable series and does it matter on the dia and length. If none of these are a suitable replacement could you please suggest what I should fit. Many thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode