Onkyo TX-NR717 No sound.

[XgN]

Re: Onkyo TX-NR717 No sound.

No, do not do anything to the DTS.
Most likely it is something else.
For a start check all power rails going to the hdmi board.
Do you have video output? Is the OSD working? Is the internet radio ( DLNA? ) working?

Yes, I have tried connecting to a TV via HDMI output and it shows the menu perfectly. Also Ethernet is working and successfully connecting to home network. Also it's reading an USB, playing tracks but even with Pure Audio enabled there is no sound on this setup (USB Input).
I think someone tried to repair this board - screws are used.

[madan1]

Re: Onkyo TX-NR717 No sound.

In this case you should start with the board connections.
See the SM for the signal flow paths.
Once you are sure all boards are connected properly, you can start checking the power supplies on the HDMI board.
Try tracing the analog audio to the ADC and DAC. If you have troubles doing this, post some HD photos of the boards to pinpoint you the test points.