Re: Sasmung la40m81bd - Recapped
This one matches first 9 numbers? https://www.ebay.co.uk/itm/272695645973
This one matches first 9 numbers? https://www.ebay.co.uk/itm/272695645973
No Power, Keeps clicking, Clours incorrect, No DTV / ATV, No DTV or RF signal on TV. SMPS capacitor failure causing No power or No DTV to above models. This is due to EEprom value in Factory setting change when SMPS failure (side effect
Product : LCD TV Bulletin No. : 10-LCD_TV-A003 Model : LA 40/46/52 M81BDX/XSA Bulletin D 24 Apr 2010 LA40/46 N81BDX/XSA Buyer SEAU LA32/40 R81BDX/XSA LA32/40/46 S81BDX/XSA LA40/46/52 F81BDX/XSA Subject : SMPS failure due to SamHwa Cap causing MAIN BOARD EEPROM setting change No Power, Keeps clicking, Clours incorrect, No DTV / ATV, No DTV or RF signal on TV. SMPS capacitor failure causing No power or No DTV to above models. This is due to EEprom value in Factory setting change when SMPS failure (side effect) [Step1] Replace Capacitors which bloated from SMPS (Refer Table below) & perform data adjustment in [Step 4] ** If still fails to power on and keeps clicking refer steps 2, 3 & 4: [Step2] Replace Eprom IC1803 (8 Pin surface Mount IC) ** Once power on for 1st time after Eprom replacement TV will click on / off 3 times then picture will illumina te [Step3] Access Service Mode – Press the following ** TV in off state then on remote press INFO – MENU – MUTE – POWER ON [Step4] Perform Data Adjustment in SVC Mode (2.Option table & 8.Adjust menu, refer following pages)
Comment