Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Game Consoles & Other Weird Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 12-13-2022, 09:53 AM   #1
Badcaps Veteran
Join Date: Aug 2020
City & State: Philadelphia, PA
My Country: US
I'm a: Knowledge Seeker
Posts: 663
Default Logitech G613 sticky keys (keys duplicating)

Trying to fix for a friend of mine.

Random keys (primarily L, M, A, and G) occasionally duplicate inputs (you press the key and get 2 copies of the letter instead of one)

Googling led to a person saying the issue is the board flexes over time which makes a bad joint on the 0 Ohm resistors along the back of the board. So I opened the keyboard up and reflowed every single resistor. Every one I heated with hot air, nudged it and let surface tension pull it back in. I tested the resistors and they are all close to 0 Ohms (0.2 to 0.3 ish)

I also swapped out the L and M key with 2 keys that were never, ever used just to eliminate any mechanical failure.

Upon testing however, the keys still occasionally duplicate. It is working better, but still not perfect.

Any ideas?

Last edited by SluggerB; 12-13-2022 at 10:33 AM..
SluggerB is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2023
Powered by vBulletin ®
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 08:38 AM.
Did you find this forum helpful?