hello
I have a laptop dell lat E5550 no power ,but I see the stdby 3.3V 5V and 13.70v all okay.I don't get ddr supply no cpu score nor I get 3.3v and 5v S0 voltage.So basically what I understand my micom MEC5085-lzy could be corrupted as RUN_on and SUS_on control voltage is not there.
anyone programmed this mec5085 chip with svod programmer.it only reads but for write it gives errors.I tried to short #fwp short to ground .but same error.
pls if some one know how to program
I have a laptop dell lat E5550 no power ,but I see the stdby 3.3V 5V and 13.70v all okay.I don't get ddr supply no cpu score nor I get 3.3v and 5v S0 voltage.So basically what I understand my micom MEC5085-lzy could be corrupted as RUN_on and SUS_on control voltage is not there.
anyone programmed this mec5085 chip with svod programmer.it only reads but for write it gives errors.I tried to short #fwp short to ground .but same error.
pls if some one know how to program
Comment