Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Asus K43sv- Display?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Asus K43sv- Display?

    Hello to all Badcapsian...

    i'm here again to ask a help about my Asus K43SV

    Main Problem No Display

    No.1 No Display
    No.2 Automatic turn on if i plug the Adapter (Supply)

    i do the following.
    1. Cleaning mobo, ram (3 Brands i test but 2 of them is 100% working)
    2. Change Adapter (supply)
    Also I test The LED to Working Unit as a same compatible type ( LED Working)

    but i avoid Reheating the VGA Chip


    i need your Solution... TIA
    Last edited by lorins_core; 02-16-2016, 10:12 PM. Reason: LED

    #2
    Re: Asus K43sv- Display?

    Updating......

    I look at the the board they have corroded @ ITE Chip as know IO Chip
    - i try to re soldering the pin and trace no open circuit.
    question in is a Culprit on the system board. or if i have a same chip available and i Change it(replace As Same type). can do anything example: Update bios...
    Need Advice Please...
    How can i Do?
    Last edited by lorins_core; 02-17-2016, 03:01 AM. Reason: do it

    Comment


      #3
      Re: Asus K43sv- Display?

      Follow up.....

      Comment


        #4
        Re: Asus K43sv- Display?

        Originally posted by lorins_core View Post
        Hello to all Badcapsian...

        i'm here again to ask a help about my Asus K43SV

        Main Problem No Display

        No.1 No Display
        No.2 Automatic turn on if i plug the Adapter (Supply)

        i do the following.
        1. Cleaning mobo, ram (3 Brands i test but 2 of them is 100% working)
        2. Change Adapter (supply)
        Also I test The LED to Working Unit as a same compatible type ( LED Working)

        but i avoid Reheating the VGA Chip


        i need your Solution... TIA




        flash bios

        Comment


          #5
          Re: Asus K43sv- Display?

          flashing bios is the best option

          Comment


            #6
            Re: Asus K43sv- Display?

            Hello there friends..,i also have same problem and i did try to flash bios but same outcome..is there any solution available out there?? Or some one have a schematic for this board..thanks

            Comment


              #7
              Re: Asus K43sv- Display?

              I also have same problem, k43sv rev 3.0,no display, but capslock usb keyboard normal

              Comment


                #8
                Re: Asus K43sv- Display?

                Originally posted by Febri alfio View Post
                I also have same problem, k43sv rev 3.0,no display, but capslock usb keyboard normal
                check 3v LCD

                Comment


                  #9
                  Re: Asus K43sv- Display?

                  i have same issue. i check voltage on lvds section i 19v present but no 3.3v. i need schematic ot someone solve this kind of issue.

                  Comment


                    #10
                    Re: Asus K43sv- Display?

                    Originally posted by vhn1998 View Post
                    check 3v LCD
                    did you solve the problem?

                    Comment


                      #11
                      Re: Asus K43sv- Display?

                      I also have this problem, with usb keyboard function, missing LED_BKLTEN and +3VS_LCD,
                      I tried to convert it to UMA by removing +VGA_VCORE coil and LED_BKLTEN and +3VS_LCD reads 3.3v but still no display

                      Comment


                        #12
                        Re: Asus K43sv- Display?

                        Since you have corrosion on the board, you need to examine both sides of the board very carefully for additional liquid damage. Do not power up the board until you've cleaned it and replaced the corroded components.

                        Bear in mind that liquid and corrosion can get under big chips, and this is especially relevant for BGA ones.

                        After this do the standard diagnostics: RTC battery voltage, coil resistances, S5 voltage and current draw before proceeding further.

                        Please follow the methodology and do not attempt to guess solutions.

                        Comment

                        Working...
                        X