Re: Has anyone used this module before Voltage Regulator DC 4-40V To DC1.25-36V 8A 20
if the controller says there is a sensor error then it shuts off power to the heater.
so if your heater was glowing you have other issues - either wrong wiring or maybe a shorted triac.
6pin pinout:
6pin:
1 - black (thermocouple+)
2 - blue (thermocouple-)
3 - red (heater)
4 - red (heater)
5 - white (switch)
6 - white (switch)
shell - earth(yellow)
--------------------------
if the controller says there is a sensor error then it shuts off power to the heater.
so if your heater was glowing you have other issues - either wrong wiring or maybe a shorted triac.
6pin pinout:
6pin:
1 - black (thermocouple+)
2 - blue (thermocouple-)
3 - red (heater)
4 - red (heater)
5 - white (switch)
6 - white (switch)
shell - earth(yellow)
--------------------------
Comment