Not good at identifying caps - 180uF in what Voltage/cap type? Card boots, but I saw that one leg was broken and have pulled the other one off for replacement (top/left of photo). Radeon AIW 9700 Pro.
My uneducated guess is 180uF SMD aluminum electrolytic of maybe 16V, since the card pulls from the 4-pin floppy connector. Lower Voltage? I see the 10V cap over to the right, so perhaps that one is being used for input Voltage of 5V, not pulling from the 12V pin?
Photo:
My uneducated guess is 180uF SMD aluminum electrolytic of maybe 16V, since the card pulls from the 4-pin floppy connector. Lower Voltage? I see the 10V cap over to the right, so perhaps that one is being used for input Voltage of 5V, not pulling from the 12V pin?
Photo:
Comment