I am troubleshooting why my TV will not turn on. It has been turning off randomly and now it will not power on. I believe I have traced the problem to be a bad Integrated Circuit on the power supply as well as a couple resistors connected to the IC. In my research i found that the IC9301 is what is responsible for the 5vdc standby power. I do not have 5vdc on the standby power terminals. So I am receiving a new IC from digikey today that I am going to install. However on the back of the board there are the two resistors that are connected to pin 1 of IC9301. Unfortunately I haven't been able to find a schematic or even a picture of the back of the board that would show me what value of resistor i need to get to repair it. Does Someone have this info? I have looked through the thread that has links for service manuals and not one of these sites has my TV model or a similar model that might use the same or similar power supplies.
I have attached two pictures. one of the bad IC9301 removed from the circuit board. the other of the back of the board where i need to replace the resistors.
I have attached two pictures. one of the bad IC9301 removed from the circuit board. the other of the back of the board where i need to replace the resistors.
Comment