So I found this receiver at my local transfer station brought it home and plugged it in and it seemed to work fine. Once I started watching something I noticed it flickered for a second. The sound was fine but the picture would blink for a second and then come back and it does this every couple of seconds. So I did some research and couldn't find any issue with this specific receiver (TX-NR525 yr 2013). I did see a lot of issue's with the hdmi boards on older models.
I'm a newbie and have had luck in the past fixing T.V.'s but mostly by buying new boards. I'd like to use this opportunity to dig a little deeper and see if I can fix the board. I've noticed on a lot the onkyo hdmi boards issue's where bad caps. I'm guess this might be a cap going bad?
So the hdmi board I have is bchdm 1347. I've include pictures. Let me know what you guys/gals think could be the issue with the board.
Thanks
I'm a newbie and have had luck in the past fixing T.V.'s but mostly by buying new boards. I'd like to use this opportunity to dig a little deeper and see if I can fix the board. I've noticed on a lot the onkyo hdmi boards issue's where bad caps. I'm guess this might be a cap going bad?
So the hdmi board I have is bchdm 1347. I've include pictures. Let me know what you guys/gals think could be the issue with the board.
Thanks
Comment