Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 08-13-2019, 11:39 PM   #1
ganiboy76
New Member
 
Join Date: Aug 2019
City & State: Udaneta city, Pangasinan
My Country: Philippines
Line Voltage: 220Vac/55kz line to ground
I'm a: Knowledge Seeker
Posts: 8
Default ACER D270 SHORTED Vin main Power rail

hi guys i have this acer d270 . DAOZE7MB6DO REV : D mother board. no power on lights ,no charger lights indicator.
done check.
1- remove battery. charger ok 19v
2- VA1 across PL6 fluctuating 1.5v max VA2 after PD7 fluctuating 0.5v
3- PQ38 getting hot pin 123 fluctuating 0.5 , pin 5-8 0v short to ground
4-remove PC 84,85,86 and PD8 check component ok .. read voltage while component remove ..still thesame fluctuating reading.
5-check PR 133 Vin-- remove and check PC 87,88 .same Vin shorted to ground...notice..PQ38 getting hot at 10seconds
6--checking board view.. and there are lots of capacitor 0.1, 4.7 and 2200.. connecteed to Vin-to-ground.. is there a way to isolate other stage that have Vin supply???
Attached Images
File Type: png ao d270 ower jack pq38 pq41.PNG (113.6 KB, 5 views)
File Type: png MAIN POWER RAIL Vin at PR 133.PNG (167.5 KB, 3 views)

Last edited by ganiboy76; 08-13-2019 at 11:56 PM.. Reason: colon and letter d become emoticon
ganiboy76 is offline   Reply With Quote
Old 08-14-2019, 12:39 AM   #2
mcplslg123
Badcaps Veteran
 
Join Date: Jun 2015
City & State: siliguri
My Country: india
Line Voltage: 220vac,60hz
I'm a: Professional Tech
Posts: 1,881
Default Re: ACER D270 SHORTED Vin main Power rail

You mean even after removing PR133, PQ38 getting hot?? It seems you have your +19V rail shorted. Which side of PR133 is showing short to GND?? If you have dc supply, inject voltage at the shorted side of PR133. IF PQ38 getting hot even when you remove PR133, then PQ38 itself may be bad. Measure Resistance on all pins of PQ38.
mcplslg123 is offline   Reply With Quote
Old 08-14-2019, 01:50 AM   #3
ganiboy76
New Member
 
Join Date: Aug 2019
City & State: Udaneta city, Pangasinan
My Country: Philippines
Line Voltage: 220Vac/55kz line to ground
I'm a: Knowledge Seeker
Posts: 8
Default Re: ACER D270 SHORTED Vin main Power rail

Quote:
Originally Posted by mcplslg123 View Post
You mean even after removing PR133, PQ38 getting hot?? It seems you have your +19V rail shorted. Which side of PR133 is showing short to GND?? If you have dc supply, inject voltage at the shorted side of PR133. IF PQ38 getting hot even when you remove PR133, then PQ38 itself may be bad. Measure Resistance on all pins of PQ38.
yeah seems like the pq38 is the culprit.. when its getting hot and i apply alcohol it cools and the 19v, appear on VA1 AND VA2 SIDE CHARGER SIDE.BEFORE PQ38..AND when its get hoter the 19v, becomes 1,5 fluctuating..
ganiboy76 is offline   Reply With Quote
Old 08-15-2019, 10:52 PM   #4
ganiboy76
New Member
 
Join Date: Aug 2019
City & State: Udaneta city, Pangasinan
My Country: Philippines
Line Voltage: 220Vac/55kz line to ground
I'm a: Knowledge Seeker
Posts: 8
Default Re: ACER D270 SHORTED Vin main Power rail

update on this post.. the pc 105 is shorted and pq38 faulty..replaced. now solved.thread closed and thanks for the schematic and board view
ganiboy76 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2019
Powered by vBulletin ®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 05:42 AM.
Did you find this forum helpful?