Hello all, taking a break from the Vizio I've been working on to try and save this Insignia I picked up from the scrapper.
Panel is good from a visual inspection, no apparent cracks.
Plugging in the TV gives me a solid red light on the indicator panel.
Pressing power, nothing changes.
I opened the unit up and found a very simple design. Power board, main board, T-Con, speakers, and a button board.
Power supply has ~17V on the two 16V pins, 3.4V for the STB pin, 12.8V for the 12V pins, all as they should be. But the set won't power on.
So, a main board issue? Anyone care to advise me further on what to look for first, on what board?
Pictures attached.
Thanks in advance.
Panel is good from a visual inspection, no apparent cracks.
Plugging in the TV gives me a solid red light on the indicator panel.
Pressing power, nothing changes.
I opened the unit up and found a very simple design. Power board, main board, T-Con, speakers, and a button board.
Power supply has ~17V on the two 16V pins, 3.4V for the STB pin, 12.8V for the 12V pins, all as they should be. But the set won't power on.
So, a main board issue? Anyone care to advise me further on what to look for first, on what board?
Pictures attached.
Thanks in advance.
Comment