Hi.
I have Asus AiO ET2220I motherboard which triggers USB Over Current Status. All present USB ports are ok, no obvious short to ground. AiO itself was dropped, which resulted in broken touch panel. I suspect something like broken current sensing resistor, but can't find any.
If anyone could provide me with schematic or any advice how to solve this, it would be much appreciated. Thanks in advance.
I have Asus AiO ET2220I motherboard which triggers USB Over Current Status. All present USB ports are ok, no obvious short to ground. AiO itself was dropped, which resulted in broken touch panel. I suspect something like broken current sensing resistor, but can't find any.
If anyone could provide me with schematic or any advice how to solve this, it would be much appreciated. Thanks in advance.
Comment