I pulled 14 of these NRSY 1000uF 10v 10mm caps from a Supermicro P4SBA. They don't have any series marking, but temp range goes down to -55C.
13 of them were bulged and tested high ESR. They all have the date code 0108.
1 of them looks good and tested normal ESR. It has the date code 0042. Otherwise identical to the others.
The good cap was in parallel with bad ones on Vmem. So it had the same stress the others did.
13 of them were bulged and tested high ESR. They all have the date code 0108.
1 of them looks good and tested normal ESR. It has the date code 0042. Otherwise identical to the others.
The good cap was in parallel with bad ones on Vmem. So it had the same stress the others did.
Comment