Announcement

Collapse
No announcement yet.

I-INC IF281d Flashing on and off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I-INC IF281d Flashing on and off

    I have an I-INC IF281d Monitor and am having an issue where for the first few minutes when i turn it on the screen flashes on and off and eventually turns on and is fine. Here is a youtube video of someone elses monitor doing the same thing as mine. http://www.youtube.com/watch?v=1eVEJimknzk Any idea what the problem could be?
    Last edited by matt230; 02-04-2013, 09:33 PM.

    #2
    Re: I-INC IF281d Flashing on and off

    Did you open it up and do any inspection yet? We need to see good clear pictures of the boards, please use file attachment function upload the pictures, do not post the pictures in line.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: I-INC IF281d Flashing on and off

      Sound like bad caps, but like the man says, open it up and post some photos.

      Comment


        #4
        Re: I-INC IF281d Flashing on and off

        Thanks for the reply. I will be home in about 3 hours and will take and post pics then.

        Comment


          #5
          Re: I-INC IF281d Flashing on and off

          Here are the pics you requested. Hope these are good enough.
          Attached Files

          Comment


            #6
            Re: I-INC IF281d Flashing on and off

            Bump

            Comment


              #7
              Re: I-INC IF281d Flashing on and off

              give make and values of electrolitic capacitors on psu board
              these are usall poor qualty but do not swell up

              Comment


                #8
                Re: I-INC IF281d Flashing on and off

                Your mainboard appears to be the same one used on the hanns-g hg281d. Caps C80 and C83 are a known problem on this board for drying out.

                Comment


                  #9
                  Re: I-INC IF281d Flashing on and off

                  You need to check the voltages on the two 3-pin regulators on the bottom right of the board as shown in your pictures, it does look similar to hanns-g hg281d main board.
                  You can also try setting the pc video resolution to lowest setting to see if the screen will stay on.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment


                    #10
                    Re: I-INC IF281d Flashing on and off

                    You figure out which caps need to be replaced, mine is doing the same thing.

                    Comment


                      #11
                      Re: I-INC IF281d Flashing on and off

                      The two caps in red circle.
                      Attached Files
                      Never stop learning
                      Basic LCD TV and Monitor troubleshooting guides.
                      http://www.badcaps.net/forum/showthr...956#post305956

                      Voltage Regulator (LDO) testing:
                      http://www.badcaps.net/forum/showthr...999#post300999

                      Inverter testing using old CFL:
                      http://www.badcaps.net/forum/showthr...er+testing+cfl

                      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                      http://s807.photobucket.com/user/budm/library/

                      TV Factory reset codes listing:
                      http://www.badcaps.net/forum/showthread.php?t=24809

                      Comment


                        #12
                        Re: I-INC IF281d Flashing on and off

                        Thank you very much.

                        Comment


                          #13
                          Re: I-INC IF281d Flashing on and off

                          Originally posted by budm View Post
                          The two caps in red circle.
                          I had a similar problem and replaced the caps you have circled and it fixed the problem in my Hg281D and my If281D.

                          Thank you!

                          Comment


                            #14
                            Re: I-INC IF281d Flashing on and off

                            I know this is really late, but I just wanted to thank you for your help on this. I was able to fix it thanks to you guys. Your help was appreciated very much.
                            Last edited by matt230; 08-21-2018, 10:50 AM.

                            Comment


                              #15
                              Re: I-INC IF281d Flashing on and off

                              Originally posted by budm View Post
                              You need to check the voltages on the two 3-pin regulators on the bottom right of the board as shown in your pictures, it does look similar to hanns-g hg281d main board.
                              You can also try setting the pc video resolution to lowest setting to see if the screen will stay on.

                              Just found this thread. Could I just replace the board with the hanns-g instead of trying to replace the capacitors??

                              Comment

                              Working...
                              X