Badcaps.net Forum
Go Back   Badcaps Forums > Motherboards with Bad Capacitors > ECS - EpoX - Gigabyte
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 05-11-2018, 12:20 PM   #1
airs
New Member
 
Join Date: May 2018
City & State: Seattle
My Country: United States
I'm a: Knowledge Seeker
Posts: 4
Default EpoX EP-MVP3G-M Super Socket 7 recap

Hi all, I'm looking to fully recap this Super Socket 7 motherboard as one of the Teyah 1000uf 6.3v caps on it has failed. Here are some pictures of the two types of caps used on the board (Teyah 1000uf 6.3v and Teyah 100uf 16v). Can you please give some suggestions on what to use as replacements? I'm located in the US and I typically order from Digikey or Mouser, but not opposed to ordering from elsewhere. Thank you!







Last edited by airs; 05-11-2018 at 12:27 PM..
airs is offline   Reply With Quote
Old 05-12-2018, 01:04 AM   #2
Sparkey55
Badcaps Veteran
 
Join Date: Jan 2010
City & State: OK
My Country: USA
I'm a: Professional Tech
Posts: 1,441
Default Re: EpoX EP-MVP3G-M Super Socket 7 recap

What is the Series and the diameter of the TAYEH 1000uf caps?
If they are 8mm in diameter these could work...
http://www.badcaps.net/store/product...products_id=46

Most likely overkill for a socket 7 board.
I can not find a data sheet for TAYEH but others say TAYEH are close to TEAPO in specs.
Sparkey55 is offline   Reply With Quote
Old 05-14-2018, 08:39 AM   #3
airs
New Member
 
Join Date: May 2018
City & State: Seattle
My Country: United States
I'm a: Knowledge Seeker
Posts: 4
Default Re: EpoX EP-MVP3G-M Super Socket 7 recap

Quote:
Originally Posted by Sparkey55 View Post
What is the Series and the diameter of the TAYEH 1000uf caps?
If they are 8mm in diameter these could work...
http://www.badcaps.net/store/product...products_id=46

Most likely overkill for a socket 7 board.
I can not find a data sheet for TAYEH but others say TAYEH are close to TEAPO in specs.
Thank you for the reply. The diameter is 8mm on the 6.3v 1000uf caps. I’m not sure what series they are though - C925 is printed on them - is that the series?

The diameter for the 16v 100uf caps is 5mm. Any idea what I should use to replace those?
airs is offline   Reply With Quote
Old 05-14-2018, 12:13 PM   #4
Sparkey55
Badcaps Veteran
 
Join Date: Jan 2010
City & State: OK
My Country: USA
I'm a: Professional Tech
Posts: 1,441
Default Re: EpoX EP-MVP3G-M Super Socket 7 recap

Quote:
Originally Posted by airs View Post
Thank you for the reply. The diameter is 8mm on the 6.3v 1000uf caps. Iím not sure what series they are though - C925 is printed on them - is that the series?

The diameter for the 16v 100uf caps is 5mm. Any idea what I should use to replace those?
http://www.badcaps.net/store/product...roducts_id=112
Sparkey55 is offline   Reply With Quote
Old 05-14-2018, 02:38 PM   #5
airs
New Member
 
Join Date: May 2018
City & State: Seattle
My Country: United States
I'm a: Knowledge Seeker
Posts: 4
Default Re: EpoX EP-MVP3G-M Super Socket 7 recap

Quote:
Originally Posted by Sparkey55 View Post
Thanks Sparkey! So its not a problem in this case to increase the capacitance from 100uf to 220uf?
airs is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums © 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 06:54 PM.

Did you find this forum helpful?