I have a Mission MS8 subwoofer here for repair. I had a bubbled cap and also I have a burnt part. I am hoping someone will be able to help with the value of the capacitor. The location # is C11. Or if you have schematic you can share would be much appreciated. Thanks
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Mission MS8 Subwoofer
Collapse
X
-
Re: Mission MS8 Subwoofer
https://www.flickr.com/photos/145608...posted-public/
https://www.flickr.com/photos/145608...posted-public/
Comment
-
Re: Mission MS8 Subwoofer
Originally posted by CapLeaker View Postcan we see a high resolution, straight shot picture of your board and upload it as an Attachment.
That being said, that may or may not be something along the lines of 100nF perhaps.
Any chance of a shot of the bottom side of the board?Khron's Cave - Electronics - Audio - Teardowns - Mods - Repairs - Projects - Music - Rants - Shenanigans
Comment
-
Re: Mission MS8 Subwoofer
It will be good to see the pictures of the whole top and bottom side of the board so we can determine the function of that cap.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
-
Re: Mission MS8 Subwoofer
Originally posted by tvrepairs View PostWill put it back up on the bench tomorrow and take pictures. Right now I had a shipment of tv`s come in from a supplier that I needed to get done and out
Comment
-
Re: Mission MS8 Subwoofer
Hello, I'm currently having this same problem with my ms8, or at least i can see that i also have the same cap gone on the board, if thats all that is wrong im not a expert, I come from a car audio background. Is it possible to find the same value of cap say out of another component I may have around or am I wasting my time?
Comment
Comment