Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Eeprom dump thread!

    Originally posted by dani502017 View Post
    from my experience I suspect the nand software
    Any ideas how to fix it?

    Comment


      Re: Eeprom dump thread!

      Hi.
      I need firmware for Teac led tv LEBD32D10FHD
      main board : T.MSD309.BA1B
      PANEL : TC315F303
      FLASH : 25Q32

      TV stuck in standby removed flash but have been unable to read firmware

      Comment


        Re: Eeprom dump thread!

        Originally posted by halsgate View Post
        Hi.
        I need firmware for Teac led tv LEBD32D10FHD
        main board : T.MSD309.BA1B
        PANEL : TC315F303
        FLASH : 25Q32

        TV stuck in standby removed flash but have been unable to read firmware
        try
        Attached Files

        Comment


          Re: Eeprom dump thread!

          Originally posted by antas View Post
          Any ideas how to fix it?
          If you have a cooling spraying spray you can freeze its surface and see if it goes out of the loop,
          if it comes out of the loop, it's clear the nand,

          you must rewrite the software in nand if you have the programmer rt809h or tnm.Soft I have
          Last edited by dani502017; 01-08-2019, 10:04 AM.

          Comment


            Re: Eeprom dump thread!

            Brand: Samsung
            Model: UE40D5003BW, UE40D5003BWXXC
            Chassis: BN94-04940R, BN41-01702A
            Panel: LTJ400HM05-J, LD40BGD-V1
            Attached Files

            Comment


              Re: Eeprom dump thread!

              I need bin for LA32S81B SAMSUNG and sharp LC-32LE240M .

              Comment


                Re: Eeprom dump thread!

                Originally posted by gsmtim View Post
                I need bin for LA32S81B SAMSUNG and sharp LC-32LE240M .
                For samsung i need the main and panel code

                For sharp
                Attached Files

                Comment


                  Re: Eeprom dump thread!

                  Originally posted by dani502017 View Post
                  you must rewrite the software in nand if you have the programmer rt809h or tnm.Soft I have
                  Is there any chance to rewrite with CH341A programer?
                  Attached Files

                  Comment


                    Re: Eeprom dump thread!

                    Originally posted by antas View Post
                    Is there any chance to rewrite with CH341A programer?
                    No unfortunately

                    Comment


                      Re: Eeprom dump thread!

                      Originally posted by golyzer View Post
                      Hi everyone!
                      Has anyone got firmware or software for Telefunken T22K875 DVB-T 12V II?
                      Mainboard Vestel 17mb46
                      SW version 4.9
                      Reciever version 3.9
                      Thanks!!!!!
                      Hi everyone!
                      I've made some photos.
                      But there was no type number on the display panel.
                      Does anyone have an idea where to find the display type?
                      Thanks!
                      Attached Files

                      Comment


                        Re: Eeprom dump thread!

                        Hi
                        Just a quick question I have a Hisense LCD42V87 double scart board...the standby led stays blue...I need to know if its software or the board

                        Comment


                          Re: Eeprom dump thread!

                          Originally posted by antas View Post
                          Main is: 17MB95M vestel

                          Main board: Vestel 17MB95M
                          Power board: Vestel 17IPS71
                          Panel: LC320EUJ-FFE2
                          What is brand and model.
                          Model Serial no tag image upload
                          I will send software
                          Last edited by ayhan yılmaz; 01-09-2019, 02:39 PM.

                          Comment


                            Re: Eeprom dump thread!

                            Originally posted by golyzer View Post
                            Hi everyone!
                            I've made some photos.
                            But there was no type number on the display panel.
                            Does anyone have an idea where to find the display type?
                            Thanks!
                            TV problems What? Model Serial no Picture upload
                            İ m send mb46-?? software
                            Last edited by ayhan yılmaz; 01-09-2019, 03:29 PM.

                            Comment


                              Re: Eeprom dump thread!

                              Originally posted by ayhan yılmaz View Post
                              What is brand and model.
                              Model Serial no tag image upload
                              I will send software
                              Can you see, the information need, on this picture?
                              Attached Files

                              Comment


                                Re: Eeprom dump thread!

                                Originally posted by ayhan yılmaz View Post
                                TV problems What? Model Serial no Picture upload
                                İ m send mb46-?? software
                                Hi!
                                I'm looking for firmware or software.
                                I would like to update it.

                                dani502017 asked the display panel type.
                                I couldn't find it anywhere, so I made the pictures to see if anyone can help.

                                What you sent, is good for the tv?

                                Thanks!!
                                Attached Files

                                Comment


                                  Re: Eeprom dump thread!

                                  Originally posted by antas View Post
                                  Can you see, the information need, on this picture?
                                  Hello there.versel service export product software download system does not allow.check the software I sent you.No TV in the same series.same panel(matrix).try this software.inform me.
                                  the software I sent HITACHI_MB95_10088478_27107983_V224t This.
                                  http://s3.dosya.tc/server18/x1woqc/H...V224t.zip.html

                                  Comment


                                    Re: Eeprom dump thread!

                                    Originally posted by ayhan yılmaz View Post
                                    Hello there.versel service export product software download system does not allow.check the software I sent you.No TV in the same series.same panel(matrix).try this software.inform me.
                                    the software I sent HITACHI_MB95_10088478_27107983_V224t This.
                                    http://s3.dosya.tc/server18/x1woqc/H...V224t.zip.html
                                    Are you a vestel employee by any chance?

                                    Comment


                                      Re: Eeprom dump thread!

                                      Originally posted by golyzer View Post
                                      Hi!
                                      I'm looking for firmware or software.
                                      I would like to update it.

                                      dani502017 asked the display panel type.
                                      I couldn't find it anywhere, so I made the pictures to see if anyone can help.

                                      What you sent, is good for the tv?

                                      Thanks!!
                                      sorry.export product.vestel does not allow download of service site.
                                      pannel no mainboart bottom sheet metal he is writing

                                      Comment


                                        Re: Eeprom dump thread!

                                        Originally posted by ducky29 View Post
                                        Are you a vestel employee by any chance?
                                        my friend I'm trying.
                                        vestel does not allow you to download some of the exported products.
                                        my friend what is the problem tv?

                                        Comment


                                          Re: Eeprom dump thread!

                                          Originally posted by ayhan yılmaz View Post
                                          my friend I'm trying.
                                          vestel does not allow you to download some of the exported products.
                                          my friend what is the problem tv?
                                          I was just curios. I pay some guy to get the correct vestel firmwares for every model which has a firmware problem. It dosen't matter whats the model. He always sents me the correct firmware.

                                          Now I wanna try to get them by myself.

                                          Comment

                                          Working...
                                          X