Go Back   Badcaps Forums > Electronics Theory and Troubleshooting > Power Supply Design and Troubleshooting
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 03-01-2012, 02:47 PM   #1
New Member
Join Date: Mar 2012
City & State: Zabreg
My Country: Croatia
I'm a: Knowledge Seeker
Posts: 11
Default BENQ Q7C3 Need Help Identifying Proper Power Board

Hey guys,

a while back i diagnosed my cousin's Benq 17" FP767 ver.2 LCD monitor with a bad power board.

here is a pic of the label on the back:

unfortunately, i made the mistake of ordering a replacement power board via ebay without first opening the monitor to verify the power board number. well anyways, the ebay seller assured me that the power board he was selling would be compatible with the LCD, unfortunately it was not(connectors do not fit). to cut the story short, my cousin wanted to return the incompatible power board to the ebay seller, and in doing so he accidentally returned his broken power board to the seller, and now we no longer have the original power board that came with the LCD. i recently ordered a 3rd power board, after being reassured by the ebay seller that it would be compatible , it arrived yesterday, and once again it is not compatible.

the incompatible power boards that i have tried so far are:

1) 48.L9002.A14 (size is ok, it fits in the case BUT it does not have the appropriate connectors for the LCD backlight, or in other words, the LCD backlight cables can not be plugged into the power board)

2) 48.L5302.A00 (has the appropriate connectors, BUT its too big to fit in the case)

If any one could PLEASE help me figure out the appropriate power board number for this LCD monitor I would really appreciate it. i can post more pics if necessary....? please help

Last edited by branko; 03-01-2012 at 02:52 PM..
branko is offline   Reply With Quote
Old 12-08-2012, 10:18 AM   #2
New Member
Join Date: Oct 2006
Posts: 1
Default Re: BENQ Q7C3 Need Help Identifying Proper Power Board

I imagine this post has been long since dealt with, but for the reference of anyone else looking for this information, here is what I know:

The power board is probably a 48-L9002.A02, (that is what is in the FP767 rev 2 in front of me) but the A03 or A04 revs will probably also work. The A14 rev which was tried is for a no audio version of the monitor, so it has different electrical connections.
gregniowa is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2017
Powered by vBulletin ®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:01 PM.

Did you find this forum helpful?