Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Eeprom dump thread!

    buona sera mi servirebbe eeprom spi flash tv miia tp.s506.pa63 panel v236bj1-p01-c1-12v grazie

    Comment


      Re: Eeprom dump thread!

      hola , me prodran ayudar con el firware de la pantalla cobia TP.MS3393.PB855 se los agradecere mucho. salu2

      Comment


        Re: Eeprom dump thread!

        hi to all.
        i have a problem with my wellington tv

        Model: WL24HD279SW
        SN: 8122254 800200
        MB: 17MB110S
        PSU: 17IPS61-5
        PANEL: V236BJ1-P01 REV CB

        I tried all the core updates on usb but no luck.
        when i plug usb in tv end press ok and plug tv led start bllink fast for 3 seconds and then nothing happens.

        I need full software to rewrite on tv.

        Also mention that i have also rt809h and tryed different dumps on 2mb memory. but again no luck. now is original spi dump 2 mb.
        please any full software or any advices.

        Tv not start, no image, no backlight
        when i turn it on led blinks for 7 times and then remain on.

        Comment


          Re: Eeprom dump thread!

          Originally posted by barby16_06 View Post
          hi to all.
          i have a problem with my wellington tv

          Model: WL24HD279SW
          SN: 8122254 800200
          MB: 17MB110S
          PSU: 17IPS61-5
          PANEL: V236BJ1-P01 REV CB

          I tried all the core updates on usb but no luck.
          when i plug usb in tv end press ok and plug tv led start bllink fast for 3 seconds and then nothing happens.

          I need full software to rewrite on tv.

          Also mention that i have also rt809h and tryed different dumps on 2mb memory. but again no luck. now is original spi dump 2 mb.
          please any full software or any advices.

          Tv not start, no image, no backlight
          when i turn it on led blinks for 7 times and then remain on.

          check back light with tester.

          Comment


            Re: Eeprom dump thread!

            Originally posted by barby16_06 View Post
            hi to all.
            i have a problem with my wellington tv

            Model: WL24HD279SW
            SN: 8122254 800200
            MB: 17MB110S
            PSU: 17IPS61-5
            PANEL: V236BJ1-P01 REV CB

            I tried all the core updates on usb but no luck.
            when i plug usb in tv end press ok and plug tv led start bllink fast for 3 seconds and then nothing happens.

            I need full software to rewrite on tv.

            Also mention that i have also rt809h and tryed different dumps on 2mb memory. but again no luck. now is original spi dump 2 mb.
            please any full software or any advices.

            Tv not start, no image, no backlight
            when i turn it on led blinks for 7 times and then remain on.
            2.5mb mboot file : https://yadi.sk/d/COowg52PnZOpMw
            https://www.badcaps.net

            Comment


              Kdl-32bx330

              I need the firmware dump for the KDL-32BX330 (U150) 25q32.
              Thanks.

              Comment


                Re: Eeprom dump thread!

                Need dump for Haier 50D3505
                Attached Files
                Last edited by xfox; 11-30-2019, 09:12 PM.

                Comment


                  Re: Eeprom dump thread!

                  Originally posted by arizanotlari View Post
                  is not good. now led is not blinking even.
                  just stay on directly. no light, no boot

                  And led bar is verified. Psu is good


                  100% problem is from nand firmware, some bad blocks.

                  Comment


                    Re: Eeprom dump thread!

                    Hallo everyone,
                    i have a problem with my Dual tv ,no picture ,no LEDs , PSU ok (Tested)

                    ModelLE39F182P3CV2
                    MB: 17MB95
                    PANEL:VES390UNDA-01
                    EEPROM:MX25L1605

                    Need SPI dump for U10 (MX25L1605)
                    Can anybody help??
                    Thanks in advance..

                    Comment


                      Re: Eeprom dump thread!

                      Originally posted by barby16_06 View Post
                      is not good. now led is not blinking even.
                      just stay on directly. no light, no boot

                      And led bar is verified. Psu is good


                      100% problem is from nand firmware, some bad blocks.
                      firmware https://yadi.sk/d/s22nmXzYpSvisQ

                      nand https://yadi.sk/d/x8RiQtPQrGZKrA
                      https://www.badcaps.net

                      Comment


                        Finlux 32fhs5660

                        Hello, please ask for firmware USB Finlux 32fhs5660-TV blinking led and reboots aroundt-hank you
                        Attached Files

                        Comment


                          Re: Sony Kdl-32bx330

                          Originally posted by Pionex2020 View Post
                          I need the firmware dump for the KDL-32BX330 (U150) 25q32.
                          Thanks.
                          Can anyone help?

                          Comment


                            Re: Eeprom dump thread!

                            orijinal frimware remote contol ok hold than pulıg in
                            power point fast biling than remote control attract (sory gogle translate)
                            Attached Files

                            Comment


                              Re: Eeprom dump thread!

                              Hello Guys ,

                              Could someone of you help me and provide firmware dump for Technika TV
                              TV - Technika sm50 - 240
                              MOTHERBOARD - Vestel 17mb95m
                              Panel-VES500UNVA-2D-S02

                              I uploaded new sw config to tv and after that tv led is still blinking in stand by

                              Comment


                                Re: Eeprom dump thread!

                                Originally posted by prodigy4ever View Post
                                Hello Guys ,

                                Could someone of you help me and provide firmware dump for Technika TV
                                TV - Technika sm50 - 240
                                MOTHERBOARD - Vestel 17mb95m
                                Panel-VES500UNVA-2D-S02

                                I uploaded new sw config to tv and after that tv led is still blinking in stand by
                                Firmware : https://yadi.sk/d/VT6p916PdoelFQ

                                If you need panel files after upgrading, send me pm.
                                https://www.badcaps.net

                                Comment


                                  Re: Eeprom dump thread!

                                  Thank you very much . TV is now working but the image is up side down how to fix it ? Before when I bricked my tv it was working ok

                                  Thanks for response

                                  Comment


                                    Re: Eeprom dump thread!

                                    Can somebody share K9GAG08U0E-SCB0 dump for Samsung Plasma PN51D6500

                                    Comment


                                      Re: Eeprom dump thread!

                                      Anyone know what eeprom type chip this tv uses as on my board the eeprom is missing?

                                      BUSH LC-39GL12F T.MSD306.68A 12023 V390HJ1-L01 dump

                                      Comment


                                        Re: Eeprom dump thread!

                                        Hi Everyone,

                                        Does anyone have the dump for a

                                        Vizio----D55u-d1
                                        Main Board----715G7689-M0C-000-005K-------GXFCB0QK024010X
                                        Panel----TPT550U2-EQYSHM.G REV:S1H

                                        Thanks

                                        Comment


                                          Re: Eeprom dump thread!

                                          Looking for dump/eeproom for mg2440,mg2500,mg2540s to reset error 5B00

                                          Comment

                                          Working...
                                          X