Announcement

Collapse
No announcement yet.

Atten 8586 Repair Help needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Atten 8586 Repair Help needed

    I have an Atten 8586 soldering station at work. Unfortunately I dropped it today and the only part I managed to hold on to was the soldering wand. All the wires ripped out at the connector to the station. I was hoping someone could take a pic or tell me what wires go to which pins. I would really like to repair this unit since the company owner is kind of a penny pincher. Prefer not to buy shop tools out of my pocket. Thanks in advance

    #2
    Re: Atten 8586 Repair Help needed

    foto's of the connector please.
    i have a lot of pinouts for those, but there are a few different connectors in use!

    Comment


      #3
      Re: Atten 8586 Repair Help needed

      Originally posted by stj View Post
      foto's of the connector please.
      i have a lot of pinouts for those, but there are a few different connectors in use!
      Sorry for the delay. I was off Yesterday.




      Comment


        #4
        Re: Atten 8586 Repair Help needed

        The pins that had wires connected on this connector were 1,2,5,6,7

        Comment


          #5
          Re: Atten 8586 Repair Help needed

          I found this video which might help identify the wires in the solder iron, I see hakko 907 and the atten 8586 seem to use the same replacement iron.
          https://www.youtube.com/watch?v=aVkXNvVu7EQ
          and I found this with a pinout for a atten 8502, maybe they are similar
          https://www.jackenhack.com/atten-850...-iron-element/
          Last edited by R_J; 02-04-2018, 02:43 PM.

          Comment


            #6
            Re: Atten 8586 Repair Help needed

            ill disassembly mine and take picture.... wait a bit...

            edit1: ops i disassembled the solder station not iron... wait

            edit2: they are numbered:

            1 yellow
            2 red
            3 nothing
            4 nothing
            5 blu
            6 black
            7 green

            and here is a picture of the iron wires, as u have different color:

            green is gnd
            Attached Files
            Last edited by dellxps15; 02-05-2018, 05:12 AM.

            Comment


              #7
              Re: Atten 8586 Repair Help needed

              Thanks for all the help folks. I got it up and running again.

              Comment


                #8
                Re: Atten 8586 Repair Help needed

                Originally posted by blackburnd View Post
                Thanks for all the help folks. I got it up and running again.
                what order of colors you have put. ?
                I have the same cables as you.

                Comment

                Working...
                X