Announcement

Collapse
No announcement yet.

Sony 55hx823 4 Blinks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Sony 55hx823 4 Blinks

    Right with bl error grounded.

    Its not turning off no more, lol

    But nothing noticeable is happening..
    No sudden dimness or anything like that..

    Comment


      #22
      Re: Sony 55hx823 4 Blinks

      Update ater 1 day of full use with bl grounded.

      Runs fine in current state..
      no issues at all with backlight or anything
      Volatges on the led driver board are perfectly fine after a days full use..

      Comment


        #23
        Re: Sony 55hx823 4 Blinks

        is curious, could be with back on something is overheating maybe?

        Comment


          #24
          Re: Sony 55hx823 4 Blinks

          Even with back off soon as i reconnect the bl error cable it starts again
          with the 4 blink cycle...

          Have had the heatshield plated connect to the led driver board today.
          And it runs fine too..

          Anyway going to put the back on tomorrow and connect the bl signal to ground properly
          its just taped to the chaisis at the momnet lol...

          Quite a strange senario..

          Comment


            #25
            Re: Sony 55hx823 4 Blinks

            Update

            Tv works fine
            Is not showing any issues visually, no sign of any led being out or anything
            So will be putting the back on and use as is...
            Not the best conclusion but the tv works fine
            had about 36 hours use now..

            I still think a minor component is not quite right, either on the led driver or in the
            path of the error circuit it self causing a false error code maybe... ?

            Comment


              #26
              Re: Sony 55hx823 4 Blinks

              It is possible to have the main board throw erroneous error codes for no reason. I have an 80 inch sharp LED TV that will not power up if its been unplugged I get the 1-1 code but if i bypass the code when I plug it in it never has a problem until I get some plugin so I know that one is definitely a main board problem
              Did I leave the soldering iron on?

              Comment


                #27
                Re: Sony 55hx823 4 Blinks

                Originally posted by freakaftr8 View Post
                It is possible to have the main board throw erroneous error codes for no reason. I have an 80 inch sharp LED TV that will not power up if its been unplugged I get the 1-1 code but if i bypass the code when I plug it in it never has a problem until I get some plugin so I know that one is definitely a main board problem
                80 inches? holy cow, I bet the mainboard is pretty pricey.

                Comment


                  #28
                  Re: Sony 55hx823 4 Blinks

                  Actually it is of a rare earth material called unobtanium. If found hold onto it with dear life! Lol
                  Did I leave the soldering iron on?

                  Comment


                    #29
                    Re: Sony 55hx823 4 Blinks

                    Originally posted by freakaftr8 View Post
                    Actually it is of a rare earth material called unobtanium. If found hold onto it with dear life! Lol

                    Comment

                    Working...
                    X