View Single Post
Old 02-20-2019, 05:29 PM   #4
momaka
Badcaps Veteran
 
momaka's Avatar
 
Join Date: May 2008
City & State: VA (NoVA)
My Country: U.S.A.
Line Voltage: 120 VAC, 60 Hz
I'm a: Hobbyist Tech
Posts: 8,796
Default Re: Rubycon MCZ compatibles

Quote:
Originally Posted by stj View Post
use polymers, there are no compatables for mcz - it was the best.
Only bested by Nichicon HZ... but such small difference isn't really that important.

I agree with regards to using polymers on the GX270. I did one myself like that a long time ago, along with several other Pentium 4 motherboards. Still works fine.

These Fujitsu 2.5V, 820 uF polymers will work and fit fine:
http://www.badcaps.net/store/product...products_id=76
Don't mind their lower capacitance and voltage ratings. The CPU VRM circuit won't have problems with them.

And for the high-side caps (the ones connected to the 4-pin 12V CPU power plug), if needed:
http://www.badcaps.net/store/product...products_id=34

Last edited by momaka; 02-20-2019 at 05:31 PM..
momaka is offline   Reply With Quote