View Single Post
Old 10-13-2017, 11:11 AM   #844
acabtp
New Member
 
Join Date: Jun 2014
City & State: New Jersey!
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Knowledge Seeker
Posts: 5
Default Re: Hanns-G HG281D, LCD Monitor no power

Quote:
Originally Posted by momaka View Post
That list looks alright, acabtp.

Like you mentioned, there is no point to use two different sizes of 100uF caps if size constraints are not an issue. So it's perfectly okay to go with 5x12mm.

That said, if it was me, I'd streamline the order even further.

For example, all those different 10 uF caps, I'd just go with 10uF/50V/5x12 mm Panasonic FC for everything. Being low ESR and bigger in size, they should also last longer.
sounds good. hopefully i'll report back in a week or two with a fixed monitor. thank you!
acabtp is offline   Reply With Quote