Thread: Capacitor ESR
View Single Post
Old 01-27-2015, 08:06 AM   #5
Hop Tzop
New Member
 
Join Date: Jan 2015
City & State: Mioveni
My Country: Romania
I'm a: Knowledge Seeker
Posts: 2
Default Re: Capacitor ESR

Hi everyone,

I am new and I can't start a new thread. I'm looking in changing some electrolytic capacitors on a Gigabyte P35-S3G, near ram. I've already replaced 2 of them, but two others gone bad and I'm thinking on replacing all of them with polymer capacitors. Then searching on the internet I came on ESR. I've read that they should have different capacity if you replace electrolytic ones with polymer.

My actual capacitors are 6.3V, 1000uF and I've found polymer capacitors with the same ratings, 6.3V, 1000uF and ESR 7 mOhms. Would that be good for my motherboard?

Description of the polymer capacitor.
Code:
Manufacturer: Nichicon
Product Category: Aluminum Organic Polymer Capacitors
RoHS: RoHS Compliant Details
Product Type: Can
Capacitance: 1000 uF
Voltage Rating DC: 6.3 V
Tolerance: 20 %
ESR: 7 mOhms
Termination Style: Radial
Minimum Operating Temperature: - 55 C
Maximum Operating Temperature: + 105 C
Case Length: 12.5 mm
Case Diameter: 10 mm
Lead Spacing: 5 mm
Operating Temperature Range: - 55 C to + 105 C
Packaging: Bulk
Product: Organic Polymer Aluminum - Radial Capacitors
Series: R7
Tradename: FPCAP
Hop Tzop is offline   Reply With Quote