Originally the power supply board had a bad voltage regulator and exploded resistor and showed no signs of life when powered up. With the resistor and voltage regulator replaced, all of the voltages were where they should be according to the service manual. The standby light goes from solid blue to solid red when the power is turned on. Unfortunately the tv will not function beyond the change in standby light. When the set is turned off, the standby light flashes seven times and turns blue. Is there some reset procedure I may be unaware of as the service manual makes no reference to any such thing. Any help will be greatly appreciated.
Announcement
Collapse
No announcement yet.
Sharp LC-50LB261U won't start
Collapse
X
-
Re: Sharp LC-50LB261U won't start
You can start by providing us the pictures of the whole backside of the TV showing all the boards.
What control signals Voltages do you have, I.E. PS-ON, BL-ON, DIM, Err, etc.?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment