View Single Post
Old 11-25-2016, 07:08 PM   #7
Badcaps Veteran
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 3,500
Default Re: Hitachi LE55A6R9A - No backlight

You should be able to measure voltage accross these two points, I would leave the leads to the led's connected if you can, the two sets of wires going to the led's in the panel are connected in series.
I can't tell from the pictures but the led voltage may be isolated from the chassis ground so when you have the ground, (black) probe on the chassis you may not measure the led voltage, but by putting the meter accros the leads going to the panel led's you should get a reading.
maybe give a larger view of this area
Attached Images
File Type: jpg 9JcwcIw.jpg (90.1 KB, 55 views)

Last edited by R_J; 11-25-2016 at 07:16 PM..
R_J is online now   Reply With Quote