Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

ASUS RT-N16: Please suggest capacitor replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    ASUS RT-N16: Please suggest capacitor replacement

    From my ASUS RT-N16 router:

    HERMEI LZ
    1x 680uF/16V - 10x13mm, 1400mA, 0.026ohm @ 25c / 0.078ohm @ -10c

    Long ago someone suggested some rules when buying a replacement.
    Code:
    #new vs old
    ~~~~~~~~
    capacitance uF =
    voltage V >=
    ripple mA >=
    ESR/impedience ohm <=
    height (d x l) mm <=
    spacing mm =
    I've been following that rule all along but this time.. I can't find anything within the configuration.

    I will need to purchase from:
    http://my.element14.com/jsp/search/b...D2105%2B215571

    Where there's stock in "SG"

    I've been googling and I see some replace with a 1000uF, some 2500 uF, some 470uF... so I'm rather confused right now..
    Last edited by biatche; 12-29-2014, 11:48 PM.

    #2
    Re: Please suggest capacitor replacement

    Can you use 10 x 16mm?
    Panasonic FM EEUFM1C681
    Attached Files
    Last edited by budm; 12-30-2014, 12:00 AM.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment


      #3
      Re: Please suggest capacitor replacement

      budm: I think so, I did go ahead with what you suggested.

      Thanks!

      Comment


        #4
        Re: Please suggest capacitor replacement

        my asus rt-n16 was randomly rebooting
        started about once a week and went to about every 10-30min over a month
        took it apart to find a bad cap (16v 470uf stain around board and bulged)

        replaced it with a 16v 1500uf cap and it works prefectly

        layed it down as there was no room for it to stand

        going on 2 weeks with no issues

        Comment

        Working...
        X