Quote:
Originally Posted by stj
no, not logging.
if you put a standard meter on a car supply, it will say 12-14v
but if you put a meter with a waveform display you can see if the alternator is failing because you can see the dips between the 3 phases.
dc is not always a flat-line, even if you want it to be!
btw, i have a 22000count meter with a serial port - it's not the same thing.
|
This meter's waveform has 20KHZ bandwidth limitation. that means you cannot detect any high frequency noises it is good for low-frequency equipment like audio devices repair only. not even for switching power supply.