LG 50PJ550 Clicking

[sordids999]

Re: LG 50PJ550 Clicking

KIT363 EAY60968701 EAX61397101 50PJ550 CLICKING REPAIR KIT - OHM SUPPLIES LTD
http://www.ohmsupplies.co.uk/epages/62027733.mobile/en_GB/?ObjectPath=/Shops/62027733/Products/KIT363&ViewAction=ViewProductThanks flocko was going to try this kit

[flocko]

Re: LG 50PJ550 Clicking

The SMD resistor 680K (4) 620K(1) and 560K(1) IC 701 MC81F4316 and use 3BR1065JF gives it more head room, and is the same as used on Samsung power boards so always at hand

[sordids999]

Re: LG 50PJ550 Clicking

Update:::

Replaced all parts as described by Flocko and tv up and working now

Thanks

[flocko]

Re: LG 50PJ550 Clicking

Well done Lee, did you upgrade to the ICE3BR1065JF current mode controller. I fit these now in all my power board repairs, LG and Samsung

[sordids999]

Re: LG 50PJ550 Clicking

Well done Lee, did you upgrade to the ICE3BR1065JF current mode controller. I fit these now in all my power board repairs, LG and Samsung

yes mate thanks

[ReeceyBurger123]

Re: LG 50PJ550 Clicking

Nice one

[sordids999]

Re: LG 50PJ550 Clicking

The TV is still working fine but started to develop a faint white line going across the screen I know when I fixed it the to had a bit of image burn
So do you think it's the panel ?

[flocko]

Re: LG 50PJ550 Clicking

Hi Lee check Y buffer ribbon that lines up with it and give it a good clean,it could be Y buffer but would normally show as a dark line.but could be on its way out?

[sordids999]

Re: LG 50PJ550 Clicking

Ah that might explain it flocko I had a few black lines when I Resinstalled buffers but sorted that by finding a few ribbons out of line so fixed this but a few days later the white line appeared I'll look again

Thanks

[sordids999]

Re: LG 50PJ550 Clicking

ok cleaned like Flocko suggested all working again no white line ill keep monitoring this although the panel has image burn

thanks