Announcement

Collapse
No announcement yet.

Bush s642f factory reset

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bush s642f factory reset

    Finally got the set powered up but it won't tune.
    It stays on atv 901. Checked the locks and all off so want to try a factory reset but can't figure it out.
    Any body know how to do a factory reset on a bush?

    #2
    Re: Bush s642f factory reset

    Managed to do a factory reset but still not finding any freeview.
    Any suggestions

    Comment


      #3
      Re: Bush s642f factory reset

      Originally posted by Rickig View Post
      Managed to do a factory reset but still not finding any freeview.
      Any suggestions
      Hi,
      I've got same TV and same problem.
      Did you managed to fix it?

      Comment


        #4
        Re: Bush s642f factory reset

        Originally posted by jczarniak View Post
        Hi,
        I've got same TV and same problem.
        Did you managed to fix it?
        How to do factory reset, please?

        Comment


          #5
          Re: Bush s642f factory reset

          Managed to do a factory reset:
          MENU, 8, 8, 9, 3
          but still not finding any Freeview channels.
          Any suggestions?

          Comment


            #6
            Re: Bush s642f factory reset

            Is it scanning for channels and saying none found?
            Willing to help but I'm no expert.

            Comment


              #7
              Re: Bush s642f factory reset

              Originally posted by dick_barton View Post
              Is it scanning for channels and saying none found?
              Exactly, 0 channels found.

              Comment


                #8
                Re: Bush s642f factory reset

                Have you checked the voltages on the tuner? It may have lost it's supply.
                Willing to help but I'm no expert.

                Comment


                  #9
                  Re: Bush s642f factory reset

                  Originally posted by dick_barton View Post
                  Have you checked the voltages on the tuner? It may have lost it's supply.
                  Not sure how can I do that.
                  Recently changed 4 caps on power supply (4 x 470uF/35V), screen backlight was flickering. OK now but no Freeview.

                  Comment


                    #10
                    Re: Bush s642f factory reset

                    Does it have both an analogue and Digital tuner. If so are you auto tuning the Digital channels
                    Willing to help but I'm no expert.

                    Comment


                      #11
                      Re: Bush s642f factory reset

                      Originally posted by dick_barton View Post
                      Does it have both an analogue and Digital tuner. If so are you auto tuning the Digital channels
                      Has got both tuners.
                      I'm auto tuning both, tried separately also.
                      Result is 0 channels found for both tuners.

                      Comment


                        #12
                        Re: Bush s642f factory reset

                        Have you got a schematic?

                        Can I assume that all the other inputs are working?

                        Does it say "XX Channels found" but just not storing them?
                        Last edited by dick_barton; 03-23-2016, 06:28 AM.
                        Willing to help but I'm no expert.

                        Comment


                          #13
                          Re: Bush s642f factory reset

                          No schematic.
                          All inputs are working.
                          It say: 0 Channels found

                          Comment


                            #14
                            Re: Bush s642f factory reset

                            Can you guarantee that you have a strong signal from your aerial. Have you plugged the aerial into another set to be certain it's not an aerial/aerial cable fault.
                            Willing to help but I'm no expert.

                            Comment


                              #15
                              Re: Bush s642f factory reset

                              Yes, aerial is fine, working absolutely fine on other TV.

                              Comment


                                #16
                                Re: Bush s642f factory reset

                                Can you supply a sharp photo of the power supply connector showing any legend alongside giving the voltages read.

                                Can you also supply a photo of the main board.
                                Willing to help but I'm no expert.

                                Comment


                                  #17
                                  Re: Bush s642f factory reset

                                  There appears to be a 5V regulator feeding the tuner and several metal oxide resistors around the tuner you could check out.
                                  Attached Files
                                  Willing to help but I'm no expert.

                                  Comment


                                    #18
                                    Re: Bush s642f factory reset

                                    Originally posted by dick_barton View Post
                                    There appears to be a 5V regulator feeding the tuner and several metal oxide resistors around the tuner you could check out.
                                    Good idea.
                                    I'll check that.

                                    Comment

                                    Working...
                                    X