I have a Neato Botvac D80 series robotic vacuum with an error 3000 (problem with the lidar sensing unit). Basically, when the lidar unit starts to spin up, it doesn't reach the proper speed but spins fast and then slow and then speeds up and then slows down etc. until it errors out.
Because i have a spare working unit, I was able to track the problem to a small simple board at the base of the lidar unit.
I will attach some photos shortly.
Because i have a spare working unit, I was able to track the problem to a small simple board at the base of the lidar unit.
I will attach some photos shortly.
Comment